Phrozen Water Washable resin for resin 3D Printer LCD 3d printer uv 405nm

Designed to be easily cleaned by water, Phrozen Water-Washable Resins are sturdy, durable, print with speed, and work perfectly with beginner-friendly 3D printers. 

This 3D printer resin works best for creating 3D printed figures, miniatures, as well as product prototypes.

• 【Remove Residue with Ease】 You don’t need to wash your prints with IPA anymore, just rinse it with water and you’re good to go. 

• 【Low Viscosity】Print & post-process all your 3D models with ease.

• 【Low Odor】Say bye-bye to pungent smells as your place won’t reek of resin fumes anymore.
• 【Not Fragile】 Phrozen Water-Washable Resins are tougher than others on the market. Use this resin to create 3D printed figures, miniatures, and prototypes.

Rapid Black

• Weight: 250g/500g/1kg per bottle
• Density: 1.11 g/cm3
• Viscosity: 70-170 cps
• Surface Hardness: 76 Shore D
• UTS: 15 MPa
• EAB: 22 %
• Tensile modulus: 110 MPa
• Izod notched impact strength: 2.1 KJ/m2

Model Gray

• Weight: 1kg per bottle
• Density: 1.1 g/cm3
• Viscosity: 75-175 cps
• Surface Hardness: 77 Shore D
• UTS: 15 MPa
• EAB: 22 %
• Tensile modulus: 110 MPa
• Izod notched impact strength: 2.1 KJ/m2

Tips:

• XY resolution：0.050 mm
• Shake well before use.
• Check your recommended resin profiles parameters according to your 3D printer. Click here to find your resin profile.
• We recommend washing your prints with 95% IPA and drying it with an air gun.
• Note: Please don’t soak your prints in 95% IPA for over 30 seconds at a time.

Precautions

• Make sure to preserve resin at room temperature. Store in dark and ventilated conditions. 
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
• Keep resin away from kids and away from direct sunlight exposure.
• Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
• DO NOT dump resin. Please cure it and treat it as general plastic garbage.