ANTINSKY
Warenkorb 0
  • 3D-Drucker
    • Ergate-01 PRO Harzdrucker
    • Industrielle 3D-Drucker
    • Vollfarb-3D-Drucker
    • UV-Nachhärtegerät
    • Filament-Trockenschrank
  • Harz
    • Standardharz
    • Dekorharz
    • Dentalharz
    • Gießharz
    • Technisches Harz
    • Harzfarbstoff
  • Filament
    • PLA
      • Alle PLA & PLA+
      • Seiden-PLA
      • Nachleuchtendes PLA
    • PETG
    • ABS & ASA
      • ABS & ABS+
      • ASA
    • Flexibles TPU
    • Nylon (PA)
    • PPS
    • PVA-Stützfilament
    • PEBA-Filament
    • TPE Filament
      • TPE-65A · 2.85 mm
  • Trennfolien
    • PFA-Folie (nFEP)
    • ACF-Folie
    • HDF-Folie
  • Druckplatten
    • Druckplatten für Bambu Lab
    • Druckplatten für Creality
    • Druckplatte für Snapmaker U1
    • Prusa Build Plates
    • Flashforge Build Plates
  • Druckerteile
    • Beheizter Harzmischer
    • Filament-Trockenbox
    • Automatischer Filamentzuführer
    • Düsen für Bambu Lab
    • Extruderteile
    • Filament Tangle Cutter
      • Tangle Cutter
  • Marken
    • Phaetus
      • DXC
      • Rapido
      • Hotends
      • Weitere Produkte
    • BlueCast
    • Creality
    • Hanboost
Mein Konto
Anmeldung Registrieren
ANTINSKY
Konto Wunschzettel Warenkorb 0
  • 3D-Drucker
    • Ergate-01 PRO Harzdrucker
    • Industrielle 3D-Drucker
    • Vollfarb-3D-Drucker
    • UV-Nachhärtegerät
    • Filament-Trockenschrank
    Ergate-01 PRO
    16K-Display für feine Harzdetails.
    S130-SLM-3D-Drucker
    Metalldruck mit 500-W-Faserlaser.
    ANTBULL656
    Bauraum von 600 × 500 × 600 mm.
    J45-Vollfarb-3D-Drucker
    Mehrere Farben in einem Druckauftrag.
    Antmega Cure
    UV-Nachhärtung für Harzdrucke.
    FDC12-Filamenttrockner
    Aktive Trocknung für bis zu 12 Spulen.
  • Harz
    • Standardharz
    • Dekorharz
    • Dentalharz
    • Gießharz
    • Technisches Harz
    • Harzfarbstoff
    Standard Lite-Harz
    Für Alltagsmodelle und Prototypen.
    Standard Tough-Harz
    Zähes Harz für funktionale Prototypen.
    ABS-Like BJD-Harz
    Für Kugelgelenkpuppen und Figurenteile.
    Standard-Harz
    Für Alltagsmodelle und Prototypen.
    Waschbares 8K-Harz
    Steife Drucke mit feinen Details.
    16K Miniature Resin
    Captures fine textures on tabletop miniatures and figures.
    Nachleuchtendes Harz
    Leuchtet nach vorheriger Lichteinwirkung.
    ABS-Like-Harz
    Zähes Harz für funktionale Prototypen.
    Detail Master-Harz
    Feine Details für Miniaturen.
    Heavy Metal-Harz
    Metallische Optik für Ausstellungsmodelle.
    Macaron-Harz
    Sanft matte Oberfläche für Dekodrucke.
    Crystal Bicolor-Harz
    Zweifarbiger Effekt für Ausstellungsmodelle.
    Superklares Harz
    Transparente Modelle und Prototypen.
    Harz für provisorische Dentalmodelle
    Für provisorische Dentalmodelle.
    Dental-Schablonenharz
    Transparentes Harz für Bohrschablonen.
    Prothesenbasisharz
    Für gedruckte Prothesenbasen.
    Flexibles Prothesenbasisharz
    Flexibles Harz für Prothesenbasen.
    Dentalmodellharz
    Für gedruckte Dentalformen und -modelle.
    Aufbissschienenharz
    Für gedruckte Aufbissschienen.
    Standard-Dentalmodellharz
    Für gedruckte dentale Studienmodelle.
    Smart-Dentalgießharz
    Für dentale Gussmodelle.
    Dentales Gießharz
    Für dentale Gussmodelle.
    Wasserwaschbares Dentalmodellharz
    Wasserwaschbares Harz für Dentalmodelle.
    Gingivaharz
    Für Zahnfleischmasken auf Dentalmodellen.
    Abdrucklöffelharz
    Für individuelle dentale Abdrucklöffel.
    Smart-Dentalgießharz
    Für dentale Gussmodelle.
    Dentales Gießharz
    Für dentale Gussmodelle.
    Smart-Schmuckgießharz
    Für Schmuckmodelle im Feinguss.
    Schmuckgießharz
    Für Schmuckmodelle im Feinguss.
    W80-Schmuckgießharz
    Für Schmuckmodelle im Feinguss.
    Keramikähnliches Harz
    Glatte Oberfläche mit Keramikoptik.
    Engineering SG-Harz
    ABS-ähnliche Eigenschaften für Prototypen.
    Schlagfestes Engineering-Harz
    Schlagfest für funktionale Bauteile.
    Hochzähes Harz
    Zähere Bauteile für häufige Handhabung.
    Flammhemmendes Harz
    Für Drucke mit Anforderungen an den Flammschutz.
    Elastic Pro-Harz
    Elastisches Material für Polsterstrukturen.
    Hochtemperaturharz
    Für Bauteile mit hoher Wärmebelastung.
    Elastic Pro+-Harz
    Elastisches Material für Polsterstrukturen.
    Antistatisches Harz
    Für Bauteile mit antistatischen Anforderungen.
    Elastisches Harz
    Flexible Teile zum Biegen und Stauchen.
    Harzfarbstoff
    Färbt kompatible Harze ein.
  • Filament
    • PLA
    • PETG
    • ABS & ASA
    • Flexibles TPU
    • Nylon (PA)
    • PPS
    • PVA-Stützfilament
    • PEBA-Filament
    • TPE Filament
    Alle PLA & PLA+
    PLA+-Filament
    Schnelles PLA für den täglichen 3D-Druck.
    Mattes PLA
    Mattes Finish für Funktions- und Dekodrucke.
    UV-farbwechselndes PLA
    Ändert sein Aussehen unter UV-Licht.
    PLA in Steinoptik
    Steinoptik für dekorative Drucke.
    Seiden-PLA
    Seiden-PLA
    Glänzendes Seidenfinish für Ausstellungsstücke.
    Zweifarbiges Seiden-PLA
    Zwei Farbtöne aus verschiedenen Blickwinkeln.
    Dreifarbiges Seiden-PLA
    Drei Farbtöne aus verschiedenen Blickwinkeln.
    Regenbogen-Seiden-PLA
    Regenbogenverlauf mit glänzendem Seidenfinish.
    Zweifarbiges Seiden-PLA
    Kompakte Spule zum Testen zweifarbiger Effekte.
    Nachleuchtendes PLA
    Nachleuchtendes Seiden-PLA
    Seidenglanz mit nachleuchtendem Effekt.
    Mehrfarbiges Leucht-PLA
    Leuchtet nach vorheriger Lichteinwirkung.
    Nachleuchtendes PLA
    Leuchtet nach vorheriger Lichteinwirkung.
    PETG-Filament
    Für funktionale Bauteile und Prototypen.
    Mattes PETG
    Mattes Finish für Funktions- und Dekodrucke.
    PETG-CF-Filament
    Kohlefaserverstärktes PETG für funktionale Teile.
    Regenbogen-PETG
    Sanfte Farbverläufe im gedruckten Teil.
    Nachleuchtendes PETG
    PETG mit nachleuchtendem Effekt.
    ABS & ABS+
    ABS-Filament
    Für funktionale Bauteile und Gehäuse.
    ABS+-Filament
    Für funktionale Bauteile und Prototypen.
    ABS-CF-Filament
    Kohlefaserverstärktes ABS für funktionale Teile.
    ABS-FR-Filament
    Flammhemmendes ABS für funktionale Drucke.
    ASA
    ASA-Filament
    Für Außeneinsatz und funktionale Bauteile.
    ASA-CF-Filament
    Kohlefaserverstärktes ASA für steife Bauteile.
    TPU 85A
    Weicheres TPU für flexible Drucke.
    TPU 90A
    Flexible Drucke mit Shore-Härte 90A.
    TPU 95A
    Flexible Drucke mit Shore-Härte 95A.
    TPU 95A HS
    Flexibles TPU für schnellen Druck.
    TPU-LW 90A
    Schäumendes TPU für leichte Polsterungen.
    PA12-Filament
    Nylon für funktionale FDM-Bauteile.
    PA12-CF-Filament
    Kohlefaserverstärktes Nylon für steife Teile.
    PPA-CF30 HT
    30 % Kohlefaser für steife Bauteile.
    PPS-CF-Filament
    Kohlefaserverstärkung für technische Bauteile.
    PPS-GF-Filament
    Glasfaserverstärkung für steife Bauteile.
    PVA-Stützfilament
    Wasserlösliche Stützen für kompatible Drucker.
    PEBA 98A
    Flexibles Filament mit hoher Rückstellkraft.
    TPE-65A
    Ultra-soft Shore 65A filament for 2.85 mm setups.
  • Trennfolien
    • PFA-Folie (nFEP)
    • ACF-Folie
    • HDF-Folie
    PFA nFEP-Folie
    280 × 450 mm Folie für Harztanks.
    PFA nFEP-Folie
    220 × 310 mm Folie für Harztanks.
    PFA nFEP-Folie
    160 × 235 mm Folie für Harztanks.
    ACF-Folie
    280 × 450 mm Folie für Harztanks.
    ACF-Folie
    220 × 310 mm Folie für Harztanks.
    ACF-Folie
    160 × 235 mm Folie für Harztanks.
    HDF-Folie
    280 × 450 mm Folie für Harztanks.
    HDF-Folie
    220 × 310 mm Folie für Harztanks.
  • Druckplatten
    • Druckplatten für Bambu Lab
    • Druckplatten für Creality
    • Druckplatte für Snapmaker U1
    • Prusa Build Plates
    • Flashforge Build Plates
    PEI-Kaltdruckplatte
    Kalte PEI-Oberfläche auf flexibler Platte.
    Glatte PEI-Druckplatte
    Beidseitig glattes PEI auf Federstahl.
    PEI-Kaltdruckplatte für K2 Plus
    Passend zur Bauplattform des K2 Plus.
    PEI-Kaltdruckplatte für U1
    Passend zum Magnetbett des U1.
    Cold PEI Build Plate for Prusa
    Firm first-layer grip on Prusa MK3 and XL.
    Cold PEI Build Plate for Flashforge
    Firm first-layer grip on Creator 5 and Creator 5 Pro.
  • Druckerteile
    • Beheizter Harzmischer
    • Filament-Trockenbox
    • Automatischer Filamentzuführer
    • Düsen für Bambu Lab
    • Extruderteile
    • Filament Tangle Cutter
    HeatMixer HM100
    Mischt und erwärmt Harz vor dem Drucken.
    FilaBox
    Trocknet Filament vor dem Drucken.
    Automatischer Filamentzuführer
    Automatische Zufuhr für 1,75-mm-Filament.
    P1/X1-Wolframdüse
    Verschleißfest für abrasive Filamente.
    H2-Düse
    Ersatzdüse für Drucker der H2-Serie.
    A1/A2-Wolframdüse
    Verschleißfest für abrasive Filamente.
    A1/A2-Düse
    Ersatzdüse in mehreren Durchmessern.
    H2-Hochdurchflussdüse
    Hoher Durchfluss für schnelleren H2-Druck.
    P2-Düse
    Ersatzdüse in mehreren Durchmessern.
    A1-Extruderzahnrad
    Ersatz-Antriebsrad für den A1.
    Tangle Cutter
    Cuts tangled 1.75 mm rigid filament without power.
  • Marken
    • Phaetus
    • BlueCast
    • Creality
    • Hanboost
    DXC
    DXC2-Extruder
    Filamentantrieb für kompatible FDM-Aufbauten.
    DXC-Extruder
    Filamentantrieb für kompatible FDM-Aufbauten.
    Rapido
    Rapido X-Hotend
    Mit Liber-Hochdurchflussmodul.
    Rapido 2 Plus-Hotend
    Hotend für kompatible FDM-Drucker.
    Rapido 2-Hotend
    Hotend für kompatible FDM-Drucker.
    Rapido 2F-Hotend
    Ultrahoher Durchfluss mit PT1000-Sensor.
    Hotends
    Liber U1-Hotend
    0,4-mm-Hochdurchfluss-Hotend für U1.
    Conch Plus-Hotend für P2S
    0,4-mm-Hotend für den P2S.
    Conch M4-Hotend für P2S
    0,4-mm-EndCoat-Düse für den P2S.
    Conch M6-Hotend
    0,4-mm-Hotend für die X1/P1-Serie.
    Conch M4-Hotend
    0,4-mm-EndCoat-Düse für H2D/A1/A1 Mini.
    Conch Plus-Hotend für X1/P1
    0,4-mm-Hotend für die X1/P1-Serie.
    Weitere Produkte
    APUS 2-Extruder
    Filamentantrieb mit zwei Zahnrädern.
    X-WAX
    Gießbares Wachsharz für Mono-LCD/DLP.
    X-One V2
    Für Schmuckmodelle im Feinguss.
    X5-Gießharz
    Feine Gravuren für den Schmuckguss.
    X-Filigree V2
    Gießharz für filigrane Schmuckmodelle.
    X10-Gießharz
    Formstabil für detailreiche Gussteile.
    Cr3a-Gießharz
    Einfache Nachbearbeitung für den Schmuckguss.
    X-WAX Filigree
    Gießharz für filigrane Schmuckmodelle.
    X-Nova
    Nach dem Härten flexibel zum Steinbesatz.
    Model HR-Harz
    Glatte Urmodelle für den Formenbau.
    K1 Max
    Bauraum von 300 × 300 × 300 mm.
    K2 Plus Combo
    Mit System für mehrfarbigen Filamentdruck.
    K1C
    Für kompatible Kohlefaserfilamente.
    C1-Ultraschallschneider
    Kabelloses Schneiden für Modellbau und Basteln.

Durchsuchen Sie unseren Shop

ANTINSKY
Konto Wunschzettel Warenkorb 0
Menü
3D-Drucker
Harz
Filament
Trennfolien
Druckplatten
Druckerteile
Marken
Ergate-01 PRO Harzdrucker
Ergate-01 PRO
16K-Display für feine Harzdetails.
Industrielle 3D-Drucker
S130-SLM-3D-Drucker
Metalldruck mit 500-W-Faserlaser.
$30,000.00
ANTBULL656
Bauraum von 600 × 500 × 600 mm.
$7,500.00
Vollfarb-3D-Drucker
J45-Vollfarb-3D-Drucker
Mehrere Farben in einem Druckauftrag.
UV-Nachhärtegerät
Antmega Cure
UV-Nachhärtung für Harzdrucke.
Filament-Trockenschrank
FDC12-Filamenttrockner
Aktive Trocknung für bis zu 12 Spulen.
Standardharz
Standard Lite-Harz
Für Alltagsmodelle und Prototypen.
$10.90
Standard Tough-Harz
Zähes Harz für funktionale Prototypen.
$19.90
ABS-Like BJD-Harz
Für Kugelgelenkpuppen und Figurenteile.
$13.90
Standard-Harz
Für Alltagsmodelle und Prototypen.
$14.90
Waschbares 8K-Harz
Steife Drucke mit feinen Details.
$16.90
16K Miniature Resin
Captures fine textures on tabletop miniatures and figures.
$14.90
Nachleuchtendes Harz
Leuchtet nach vorheriger Lichteinwirkung.
$23.00
ABS-Like-Harz
Zähes Harz für funktionale Prototypen.
$13.90
Detail Master-Harz
Feine Details für Miniaturen.
$29.90
Dekorharz
Heavy Metal-Harz
Metallische Optik für Ausstellungsmodelle.
$21.99
Macaron-Harz
Sanft matte Oberfläche für Dekodrucke.
$17.90
Crystal Bicolor-Harz
Zweifarbiger Effekt für Ausstellungsmodelle.
$26.90
Superklares Harz
Transparente Modelle und Prototypen.
$49.90
Dentalharz
Harz für provisorische Dentalmodelle
Für provisorische Dentalmodelle.
$39.90
Dental-Schablonenharz
Transparentes Harz für Bohrschablonen.
$64.99
Prothesenbasisharz
Für gedruckte Prothesenbasen.
$44.90
Flexibles Prothesenbasisharz
Flexibles Harz für Prothesenbasen.
$29.90
Dentalmodellharz
Für gedruckte Dentalformen und -modelle.
$56.90
Aufbissschienenharz
Für gedruckte Aufbissschienen.
$56.90
Standard-Dentalmodellharz
Für gedruckte dentale Studienmodelle.
$18.90
Smart-Dentalgießharz
Für dentale Gussmodelle.
$59.90
Dentales Gießharz
Für dentale Gussmodelle.
$52.90
Wasserwaschbares Dentalmodellharz
Wasserwaschbares Harz für Dentalmodelle.
$49.00
Gingivaharz
Für Zahnfleischmasken auf Dentalmodellen.
$44.90
Abdrucklöffelharz
Für individuelle dentale Abdrucklöffel.
$16.99
Gießharz
Smart-Dentalgießharz
Für dentale Gussmodelle.
$59.90
Dentales Gießharz
Für dentale Gussmodelle.
$52.90
Smart-Schmuckgießharz
Für Schmuckmodelle im Feinguss.
$59.90
Schmuckgießharz
Für Schmuckmodelle im Feinguss.
$56.90
W80-Schmuckgießharz
Für Schmuckmodelle im Feinguss.
$59.90
Technisches Harz
Keramikähnliches Harz
Glatte Oberfläche mit Keramikoptik.
$49.00
Engineering SG-Harz
ABS-ähnliche Eigenschaften für Prototypen.
$66.90
Schlagfestes Engineering-Harz
Schlagfest für funktionale Bauteile.
$59.00
Hochzähes Harz
Zähere Bauteile für häufige Handhabung.
$38.90
Flammhemmendes Harz
Für Drucke mit Anforderungen an den Flammschutz.
$39.90
Elastic Pro-Harz
Elastisches Material für Polsterstrukturen.
$69.00
Hochtemperaturharz
Für Bauteile mit hoher Wärmebelastung.
$42.90
Elastic Pro+-Harz
Elastisches Material für Polsterstrukturen.
$49.00
Antistatisches Harz
Für Bauteile mit antistatischen Anforderungen.
$39.90
Elastisches Harz
Flexible Teile zum Biegen und Stauchen.
$39.90
Harzfarbstoff
Harzfarbstoff
Färbt kompatible Harze ein.
PLA
Alle PLA & PLA+
PLA+-Filament
Schnelles PLA für den täglichen 3D-Druck.
Mattes PLA
Mattes Finish für Funktions- und Dekodrucke.
UV-farbwechselndes PLA
Ändert sein Aussehen unter UV-Licht.
PLA in Steinoptik
Steinoptik für dekorative Drucke.
Seiden-PLA
Seiden-PLA
Glänzendes Seidenfinish für Ausstellungsstücke.
Zweifarbiges Seiden-PLA
Zwei Farbtöne aus verschiedenen Blickwinkeln.
Dreifarbiges Seiden-PLA
Drei Farbtöne aus verschiedenen Blickwinkeln.
Regenbogen-Seiden-PLA
Regenbogenverlauf mit glänzendem Seidenfinish.
Zweifarbiges Seiden-PLA
Kompakte Spule zum Testen zweifarbiger Effekte.
Nachleuchtendes PLA
Nachleuchtendes Seiden-PLA
Seidenglanz mit nachleuchtendem Effekt.
Mehrfarbiges Leucht-PLA
Leuchtet nach vorheriger Lichteinwirkung.
Nachleuchtendes PLA
Leuchtet nach vorheriger Lichteinwirkung.
PETG
PETG-Filament
Für funktionale Bauteile und Prototypen.
Mattes PETG
Mattes Finish für Funktions- und Dekodrucke.
PETG-CF-Filament
Kohlefaserverstärktes PETG für funktionale Teile.
Regenbogen-PETG
Sanfte Farbverläufe im gedruckten Teil.
Nachleuchtendes PETG
PETG mit nachleuchtendem Effekt.
ABS & ASA
ABS & ABS+
ABS-Filament
Für funktionale Bauteile und Gehäuse.
ABS+-Filament
Für funktionale Bauteile und Prototypen.
ABS-CF-Filament
Kohlefaserverstärktes ABS für funktionale Teile.
ABS-FR-Filament
Flammhemmendes ABS für funktionale Drucke.
ASA
ASA-Filament
Für Außeneinsatz und funktionale Bauteile.
ASA-CF-Filament
Kohlefaserverstärktes ASA für steife Bauteile.
Flexibles TPU
TPU 85A
Weicheres TPU für flexible Drucke.
TPU 90A
Flexible Drucke mit Shore-Härte 90A.
TPU 95A
Flexible Drucke mit Shore-Härte 95A.
TPU 95A HS
Flexibles TPU für schnellen Druck.
TPU-LW 90A
Schäumendes TPU für leichte Polsterungen.
Nylon (PA)
PA12-Filament
Nylon für funktionale FDM-Bauteile.
PA12-CF-Filament
Kohlefaserverstärktes Nylon für steife Teile.
PPA-CF30 HT
30 % Kohlefaser für steife Bauteile.
PPS
PPS-CF-Filament
Kohlefaserverstärkung für technische Bauteile.
PPS-GF-Filament
Glasfaserverstärkung für steife Bauteile.
PVA-Stützfilament
PVA-Stützfilament
Wasserlösliche Stützen für kompatible Drucker.
PEBA-Filament
PEBA 98A
Flexibles Filament mit hoher Rückstellkraft.
TPE Filament
TPE-65A · 2.85 mm
TPE-65A
Ultra-soft Shore 65A filament for 2.85 mm setups.
PFA-Folie (nFEP)
PFA nFEP-Folie
280 × 450 mm Folie für Harztanks.
$14.90
PFA nFEP-Folie
220 × 310 mm Folie für Harztanks.
$8.90
PFA nFEP-Folie
160 × 235 mm Folie für Harztanks.
$10.00
ACF-Folie
ACF-Folie
280 × 450 mm Folie für Harztanks.
$24.90
ACF-Folie
220 × 310 mm Folie für Harztanks.
$14.90
ACF-Folie
160 × 235 mm Folie für Harztanks.
$9.90
HDF-Folie
HDF-Folie
280 × 450 mm Folie für Harztanks.
$28.00
HDF-Folie
220 × 310 mm Folie für Harztanks.
$16.00
Druckplatten für Bambu Lab
PEI-Kaltdruckplatte
Kalte PEI-Oberfläche auf flexibler Platte.
$10.90
Glatte PEI-Druckplatte
Beidseitig glattes PEI auf Federstahl.
$9.90
Druckplatten für Creality
PEI-Kaltdruckplatte für K2 Plus
Passend zur Bauplattform des K2 Plus.
$19.99
Druckplatte für Snapmaker U1
PEI-Kaltdruckplatte für U1
Passend zum Magnetbett des U1.
Prusa Build Plates
Cold PEI Build Plate for Prusa
Firm first-layer grip on Prusa MK3 and XL.
Flashforge Build Plates
Cold PEI Build Plate for Flashforge
Firm first-layer grip on Creator 5 and Creator 5 Pro.
Beheizter Harzmischer
HeatMixer HM100
Mischt und erwärmt Harz vor dem Drucken.
Filament-Trockenbox
FilaBox
Trocknet Filament vor dem Drucken.
Automatischer Filamentzuführer
Automatischer Filamentzuführer
Automatische Zufuhr für 1,75-mm-Filament.
Düsen für Bambu Lab
P1/X1-Wolframdüse
Verschleißfest für abrasive Filamente.
$16.90
H2-Düse
Ersatzdüse für Drucker der H2-Serie.
$4.90
A1/A2-Wolframdüse
Verschleißfest für abrasive Filamente.
$16.90
A1/A2-Düse
Ersatzdüse in mehreren Durchmessern.
$4.90
H2-Hochdurchflussdüse
Hoher Durchfluss für schnelleren H2-Druck.
$5.90
P2-Düse
Ersatzdüse in mehreren Durchmessern.
$4.90
Extruderteile
A1-Extruderzahnrad
Ersatz-Antriebsrad für den A1.
Filament Tangle Cutter
Tangle Cutter
Tangle Cutter
Cuts tangled 1.75 mm rigid filament without power.
Phaetus
DXC
DXC2-Extruder
Filamentantrieb für kompatible FDM-Aufbauten.
$59.99
DXC-Extruder
Filamentantrieb für kompatible FDM-Aufbauten.
$45.99
Rapido
Rapido X-Hotend
Mit Liber-Hochdurchflussmodul.
$89.00
Rapido 2 Plus-Hotend
Hotend für kompatible FDM-Drucker.
$99.00
Rapido 2-Hotend
Hotend für kompatible FDM-Drucker.
$89.00
Rapido 2F-Hotend
Ultrahoher Durchfluss mit PT1000-Sensor.
$109.00
Hotends
Liber U1-Hotend
0,4-mm-Hochdurchfluss-Hotend für U1.
$34.99
Conch Plus-Hotend für P2S
0,4-mm-Hotend für den P2S.
$33.90
Conch M4-Hotend für P2S
0,4-mm-EndCoat-Düse für den P2S.
$23.90
Conch M6-Hotend
0,4-mm-Hotend für die X1/P1-Serie.
$21.90
Conch M4-Hotend
0,4-mm-EndCoat-Düse für H2D/A1/A1 Mini.
$24.90
Conch Plus-Hotend für X1/P1
0,4-mm-Hotend für die X1/P1-Serie.
$46.90
Weitere Produkte
APUS 2-Extruder
Filamentantrieb mit zwei Zahnrädern.
$49.50
BlueCast
X-WAX
Gießbares Wachsharz für Mono-LCD/DLP.
$129.00
X-One V2
Für Schmuckmodelle im Feinguss.
$129.00
X5-Gießharz
Feine Gravuren für den Schmuckguss.
$129.00
X-Filigree V2
Gießharz für filigrane Schmuckmodelle.
$129.00
X10-Gießharz
Formstabil für detailreiche Gussteile.
$129.00
Cr3a-Gießharz
Einfache Nachbearbeitung für den Schmuckguss.
$79.00
X-WAX Filigree
Gießharz für filigrane Schmuckmodelle.
$129.00
X-Nova
Nach dem Härten flexibel zum Steinbesatz.
$79.00
Model HR-Harz
Glatte Urmodelle für den Formenbau.
$160.00
Creality
K1 Max
Bauraum von 300 × 300 × 300 mm.
$799.00
K2 Plus Combo
Mit System für mehrfarbigen Filamentdruck.
$1,299.00
K1C
Für kompatible Kohlefaserfilamente.
$509.00
Hanboost
C1-Ultraschallschneider
Kabelloses Schneiden für Modellbau und Basteln.
$159.00
Konto Merkliste Warenkorb
Nachrichten

The Complete ANTINSKY 3D Filament Collection – Every Material, Every Color

von ANTINSKY An Aug 13, 2026

🧵 The Complete ANTINSKY 3D Filament Collection – Every Material, Every Color

Whether you are printing your first benchy or running a production line, the material you choose decides everything – strength, flexibility, surface finish, and reliability. At ANTINSKY, we build a complete filament lineup around one promise: consistent diameter, dry vacuum packaging, and honest prices. All spools are 1.75 mm with a tolerance of ±0.02 mm, wound neatly on reusable spools, and shipped in sealed vacuum bags with desiccant.

Here is the full ANTINSKY filament family, organized by material, so you can find exactly what your next print needs.


🟢 PLA Family – Easy, Fast & Beautiful

PLA is the friendliest material in 3D printing – no heated chamber required, low odor, and incredible detail. ANTINSKY PLA is made from new, premium-grade resins for consistent extrusion and minimal stringing.

  • PLA+ 3D Filament 1KG – $7.00 – Our best-selling everyday PLA+ with 26 vivid colors. Tougher than standard PLA with better layer adhesion, ideal for prototypes, toys, and decorative prints.
  • PLA Matte 3D Filament 1KG – $6.50 – A smooth, velvety matte finish that hides layer lines beautifully. 17 elegant colors, perfect for premium-looking models and photography props.
  • PLA SILK 3D Filament 1KG – $7.00 – Stunning silk-gloss surfaces with a soft, metallic sheen. 17 colors that turn vases, art pieces, and figurines into showpieces.
  • PLA+ High Speed Filament 1.75mm 1KG – $10.90 – Engineered for fast printers. Prints cleanly at high flow rates with excellent bridging, in 9 colors.
  • PLA Rock 3D Filament 1KG – $12.00 – A unique stone-textured filament with a natural matte rock surface. 3 earthy colors – perfect for architectural models, terrain, and sculptures.
  • PLA Luminous 3D Filament 1KG – $12.00 – Glow-in-the-dark PLA that charges under light and glows for hours. 3 glow colors – Green, Blue & Purple.
  • PLA UV Color Change Filament – $13.00 – Color-shifting magic: the filament changes color when exposed to sunlight or UV light, and returns when back indoors. 2 color-change options – a favorite for fun, interactive prints.

✨ Silk Special-Effect Series – Two-Tone, Tri-Color & Rainbow

  • PLA SILK Dual 3D Filament 1KG – $7.00 – One spool, two luxurious silk colors that shift as the print turns. 20 dual-color combinations like Tangerine-Purple, Rose Gold-Pink and Black-Gold.
  • PLA SILK Tri-Color 3D Filament 1KG – $7.00 – Three silk colors in one filament for stunning multi-tone surfaces. 5 tri-color combos: Red-Blue-Green, Red-Yellow-Green, Red-Yellow-Blue, Blue-Green-Purple and Black-Red-Gold.
  • Silk PLA Filament Tri-Colors – $7.50 – Another take on tri-color silk with 3 gradient combinations, great for dragons, flowers, and jewelry-like prints.
  • DUAL Colors Silk PLA Filament – $7.00 – Classic dual-color silk with 19 color pairings for bold, gradient-rich models.
  • DUAL Colors Silk PLA Filament 250G – $3.90 – The perfect sampler: same dual-color silk in a 250g trial spool at a budget-friendly price.
  • PLA SILK Rainbow 3D Filament 1KG – $7.50 – Silk rainbow color transitions along the spool – every layer shows a new hue. 2 rainbow styles.
  • PLA Luminous Multicolored 3D Filament 1.75mm 1KG – $25.00 – Glow-in-the-dark meets multicolor: 16 colors that charge in the light and glow in the dark.
  • PLA Silk Luminous Multicolor 3D Filament 1.75mm 1KG – $25.99 – Silk-gloss luminous filament with 16 multicolor options – the show-stopper for night lamps and art pieces.

🧊 PETG Family – Strong, Tough & Reliable

PETG combines the ease of PLA with the strength of ABS – impact-resistant, chemical-resistant, and food-safe friendly. The go-to material for functional parts that live outdoors or in your hands.

  • PETG 3D Filament 1KG – $6.00 – Our best-value PETG with 20 colors. Low warping, high toughness, and great layer adhesion for mechanical parts, brackets, and containers.
  • PETG Rainbow 3D Filament 1KG – $7.00 – Rainbow color transitions in a strong PETG base. 4 rainbow colorways.
  • PETG-CF 3D Filament 1KG – $12.00 – Carbon-fiber reinforced PETG with a matte black carbon texture and improved stiffness – great for drone frames and jigs.
  • PETG Glow In The Dark 3D Filament 1KG – $10.00 – Glow-in-the-dark PETG for durable outdoor signs, garden markers, and safety parts.

🟠 ABS & ASA Family – Strong, Heat-Resistant & Weatherproof

ABS and ASA are the workhorses of functional printing. ASA adds UV resistance that makes it the standard for outdoor use. ANTINSKY ABS/ASA prints with low odor and consistent results.

  • ABS 3D Filament 1KG – $7.00 – Classic ABS strength and durability at a friendly price. 2 colors.
  • ABS+ 3D Filament 1KG – $7.50 – Upgraded ABS+ with improved toughness, lower warping, and smoother surfaces. 4 colors.
  • ABS-CF 3D Filament 1KG – $12.00 – Carbon-fiber reinforced ABS with a matte carbon finish and high rigidity – ideal for functional prototypes.
  • ABS-FR 3D Filament 1KG – $11.00 – Flame-retardant ABS rated UL94 V-0 – a safety-grade choice for enclosures, housings, and electrical applications.
  • ASA 3D Filament 1KG – $10.00 – The outdoor champion: UV-resistant, weatherproof, and tough. 2 colors for car parts, garden gear, and drone components.
  • ASA-CF 3D Filament 1KG – $15.00 – Carbon-fiber reinforced ASA – extreme stiffness plus UV resistance for serious outdoor engineering.

🔶 TPU Family – Soft, Flexible & Durable

Need flexible parts that snap back? ANTINSKY TPU prints smoothly on direct-drive and Bowden printers alike, with excellent layer bonding and no clogging.

  • TPU 85A 3D Filament 1KG – $17.00 – Ultra-soft and stretchy – perfect for gaskets, phone cases, and wearable prototypes.
  • TPU 90A 3D Filament 1KG – $17.00 – The flexible all-rounder with 11 colors – good grip, great durability.
  • TPU 95A 3D Filament 1KG – $13.00 – Our most popular TPU: firm yet flexible, prints cleanly at speed. 12 colors.
  • TPU 95A HS 3D Filament 1KG – $15.00 – High-speed TPU formulation that keeps up with fast printers. 2 colors.
  • TPU-LW 90A 3D Filament 0.9KG – $25.00 – Lightweight foaming TPU – expands when printed for ultra-light flexible parts. Ideal for RC planes and drones.

⚙️ Engineering Materials – For Serious Applications

When the part has to hold a load, resist heat, or survive chemicals, reach for ANTINSKY engineering filaments. Print them on high-temperature hotends with an enclosed printer for best results.

  • PA12 (Nylon) 3D Filament 1KG – $44.00 – Low-moisture-absorption nylon with outstanding toughness and fatigue resistance – the go-to for gears, hinges, and end-use mechanical parts.
  • PA12-CF 3D Filament 1KG – $44.00 – Carbon-fiber reinforced nylon for maximum stiffness-to-weight. Warp-resistant and dimensionally stable – true production-grade parts.
  • PEBA-98A 3D Filament 1KG – $27.00 – A premium flexible engineering material with TPU-like flexibility but lighter weight, better rebound, and superb chemical resistance. A top pick for sportswear and medical prototypes.
  • PPS-GF 3D Filament 1KG – $35.00 – Glass-fiber reinforced PPS with continuous-use heat resistance up to 175°C, plus outstanding oil and chemical resistance. The choice for automotive and industrial parts.
  • PPS-CF 3D Filament 500G – $59.00 – Our flagship: carbon-fiber reinforced PPS with UL94 V-0 flame retardancy, extreme toughness, and heat resistance up to 210°C. Low water absorption and high impact resistance – built for the most demanding environments.
  • PVA 3D Filament 1KG – $18.00 – Water-soluble support material that dissolves completely, leaving no trace. Print complex geometries and remove supports effortlessly – the essential companion for dual-extrusion printers.

🎯 How to Choose Your ANTINSKY Filament

Your Need Best Pick
Everyday printing, low cost PLA+ ($7.00) or PETG ($6.00)
Beautiful showpieces & gifts PLA SILK, PLA SILK Dual / Tri-Color, PLA Matte
Outdoor & UV-exposed parts ASA or ASA-CF
Flexible & soft parts TPU 95A (firm) / TPU 90A (soft) / TPU 85A (ultra-soft)
Lightweight RC & drone parts TPU-LW 90A
Functional mechanical parts PA12 or PA12-CF
High heat / industrial use PPS-GF or PPS-CF
Flame-retardant enclosures ABS-FR (UL94 V-0) or PPS-CF (UL94 V-0)
Complex supports PVA water-soluble support

Every ANTINSKY filament spool is vacuum-sealed with desiccant and backed by our quality promise. Explore the full collection and find your next favorite material:

🛒 Shop All ANTINSKY Filaments →

Stichworte: 3D printing, ABS, ASA, filament, PA12, PETG, PLA, PPS, PVA, TPU
Vorherige
5 Stunning Translucent Colors – ANTINSKY Standard Lite Resin 1KG
Nächste
PLA vs PETG vs ABS – Which 3D Printer Filament Should You Use?

In Verbindung stehende Artikel

Co Print’s official Quadro 3D printer product image

Co Print Quadro Takes Four Independent Toolheads to Formnext 2026

Raise3D press image of T450 and T700 large-format 3D printers

Raise3D Brings Large-Format T450 and T700 Printers to Formnext 2026

ANTINSKY Antmega Cure UV Resin Curing Machine

Set Up a Resin Post-Curing Station with ANTINSKY Antmega Cure

InfiMech official MX Pro chamber heating illustration

InfiMech MX Series Sets November 10 Kickstarter Launch for Tool-Changing Printers

Hinterlasse einen Kommentar

Deine Email-Adresse wird nicht veröffentlicht.

Schnelllink

  • Drucker
  • Filamente
  • Filmveröffentlichung
  • Bauplatten
  • Zubehör
  • Partner-Marken
  • Blog

Firma

  • Suchen
  • Über uns
  • Kontaktieren Sie uns
  • Allgemeine Geschäftsbedingungen
  • Datenschutzerklärung
  • Immaterialgüterrechte
  • Versand
  • Allgemeine Geschäftsbedingungen
  • Rückerstattungsrichtlinie
  • Blog

ANTINSKY ist ein bekannter Hersteller von 3D-Drucker-Zubehör und hat seit vielen Jahren eine vertiefte Zusammenarbeit mit vielen 3D-Drucker-Marken, sodass unsere Zubehörteile wie Entformungsfolien, Harze, Filamente usw. eine beeindruckende Wirkung erzielen.

Wir sind der Überzeugung, dass die 3D-Druck-Technologie in der Zukunft mehr Träume für die Welt verwirklichen kann. Zu diesem Zweck vergessen wir unsere ursprüngliche Absicht nicht und gehen voran.

Bitte besuchen Sie die offizielle Website, um weitere Markeninformationen und Neuigkeiten zu erhalten.

© Antinsky 2026
Warenkorb 0

Einkaufswagen

Ihr Warenkorb ist derzeit leer.
Fügen Sie eine Notiz für den Verkäufer hinzu
Versandkosten ermitteln
Fügen Sie einen Rabattcode hinzu
null
Zwischensumme $0.00
Warenkorb ansehen