Co Print opened its Quadro Kickstarter on November 12, 2026, and has listed the printer for Formnext in Frankfurt from November 17 to 20, Hall 12.1, Booth G89. Quadro uses four independently driven toolheads that move along one X-axis. Co Print says each toolhead can reach the full 300 × 300 × 300 mm build volume. Co Print’s campaign and official Quadro specifications.
What separate toolheads change
Each toolhead keeps its own filament loaded. That lets the printer switch colors without flushing the old color out of one shared nozzle. Co Print describes using a small prime tower to stabilize extrusion, with a separate mode that can use infill for suitable models. Visit the booth to see how tool changes behave on parts with frequent color transitions and small details.
Prepare matching spools for a fair comparison
For a first multicolor test, pick colors from a material family with similar printing requirements. Record which spool goes on each toolhead so you can repeat the build. The ANTINSKY FilaBox can be used as a standalone spool dryer before loading filament. Check spool dimensions and drying guidance for the material, then use Co Print’s documented feed path when loading the printer.

Compare the complete print time, the material used for priming and the alignment of color boundaries on a representative model. For ordering and delivery terms, refer to the live crowdfunding campaign.
Cover image from Co Print’s official Quadro page.