Founded in 2015, Anycubic has become one of the most popular 3D printer brands in the market, with around 300 employees based in Shenzhen, China.
Their photon mono x are most popular LCD 3d printer in these years.
For Anycubic 3d printer, we have stock in US EU AU RU CA UK, can free shipping to your door quickly
At the same time ,we were authorized by Anycubic,Under our (antinsky)management, the products sell well and have been praised by customers.
Balancing softness with strength, Anycubic Flexible Tough Resin can withstand bending, flexing, and compression. It shows good strength and elongation and the ability to resist cracking while drilling holes.
Parts printed with Anycubic Flexible Tough Resin are crash-proof and show high impact strength. Besides, it can withstand high impact and other high-strength mechanical pressure.
It can provide high accuracy, smooth surface, clear print details and low shrinkage rate advantages for model printing.
Applicable for most LCD 3D printers and optimized for 3D printing wavelengths between 365nm – 405nm, better effect with ANYCUBIC LCD 3D printers.
Applicable for all kinds of models, shells and parts with rigid requirements, such as industrial spare parts, building models, DIY, maker design, daily design and other high-strength model production.
High Toughness Not Easy To Break
Balancing softness with strength , Anycubic Flexible ToughResin can withstand bending , flexing , and compressionIt shows good strength and elongation and can resit chipping ,cracking and stress mark due for cyclic Vibration movement
High toughness Not Easy To BreakWhile bending
Good tensile strength and elongation Crack resistance capability
High Rigidity and High Impact Strength
Parts printed with Anycubic Flexible Tough Resin are crash-proofand shows high impact strength . Besides , it can withstand highimpact and other high strength mechanical pressure
High precision Low shrinkage
It can provide high accuracy , smooth surface , clear print detailsand low shrinkage rate advantages for model printing
Wide Compatibility Applicable for most LCD 3D printers and optimizedfor 3D printing wavelengths between 365nm -405nmbetter effect with ANYCUBIC LCD 3D printers
Applicable for all kinds of models , shells and parts with rigidrequirements , such as industrial spare parts , building models , Dly ,maker design , daily design and other high-strength model production
Instructions for use
(1 ) Before use :Shake the liquid resin before use Clean the resin tank and the molding platform to keep the bottom of the resin tank in light transmission
( 2 ) When using Unscrew the cap and add it to the resin tank according to the equipment requirements ;Select the correct print parameters and settings for printin
( 3 ) After use :After printing , please use the matching tools for post-processing , including blade , diagonal pliers , tweezers , containers , gloves ; ethanol ( = 95 % ) ,lactate or isopropyl alcohol cleaning solution
( 4 ) post-processing steps :A . Remove the printed model from the molding platform with a blade B Submerge the model in the cleaning solution , rinsed or ultrasonicallwashed . then taken out and drained : ANYCUBLC Wash and Cure machinesare suggested to ensure better effectC Proper processing , such as removing support , polishing , coloring , etc
The ideal condition for storing uncured resin is a cool , dark place at roomtemperature and protect from light to avoid high temperature or sunlight
Suggested operating temperature is 18-35C , and a low temperature mayaffect the printing effect , thus , the resin can be properly preheated beforeuse ( not more than 60℃）
If the resin pigment settles , it can be used after stirring or shaking
To ensure the ideal performance of the curable material , it is necessary tocontrol the intensity and time of the light source after curing , so it isrecommended that:
( 1 ] ) The intensity of mercury lamp or LED light source is 5-10mw / m2 , andthe duration is no more than 1 hour ( self-regulation )
( 2 ) The exposure time in the sun ( summer ) is around 1 hour ;
( 3 ) Proximity or long-term exposure under strong light sources such ashigh-power high-pressure mercury lamps is prohibited
( 4 ) It is recommended to print in a dark room or be covered with a lid whileprinting as resin is a photosensitive material
PS : Material properties will vary depending on the molding equipment ,post-cure method and testing equipment . For safety information , pleaserefer to the MSDS of this product . If you encounter any problems during use ,please feel free to contact us