e-Mail:lin.chenglei@antinsky.com . WhatsApp:+86 18250765135

Firmware download

李亦
0 comments

Firmware downloads

For firmware updates, please note that the files may differ according to the device you’re using.
WARNING: Install the wrong firmware may result in system failure. Make sure you have downloaded the correct file and follow the correct installation procedure.

 

CHITUBOX Firmware Download & Update

This firmware update allows your 3D printer to exclusively read files sliced by CHITUBOX v1.9.0 (and above), CHITUBOX Pro, as well as Lychee Slicer.

Updating firmware for Sonic Mighty 8K

Printer Download Release Date File Size
Sonic Mighty 8K

20220809_Mighty-8K-PHZ-V126_F3218

 2022-08-09 47.9 MB

Please watch an instructional video at Sonic Mighty 8K - Update firmware V1-2-6

The update of Sonic Mighty 8K can be done in 3 steps:

[STEP 1] - Save the unzipped firmware files to a formatted USB drive
[STEP 2] - Press the file "FPGA_v3218.RBF" on the touch panel to update
[STEP 3] - Reboot the printer, and the rest of the update will start automatically

 

The detailed instructions are as follows:

[STEP 1]

  1. Download the firmware file to your PC and unzip the ".rar" file
  2. Prepare a USB drive (8GB or 16GB, and USB 2.0 is preferred). Format it to FAT32 and set its allocation to 2048 bytes
  3. Save the files "FPGA_v3218.RBF" & "ChituUpgrade.bin" in the root folder of the formatted USB
  4. Turn on your printer, then plug the USB drive into the printer

[STEP 2]

  1. On the touch panel's homepage, tap the "Print" icon > USB > FPGA_v3218.RBF > Update > Update
  2. "phrozen FPGA Update" is displayed on the touch panel and waits for a progress bar to finish
  3. "FPGA update" is completed > OK

[STEP 3]

  1. Restart the printer
  2. "phrozen System Update" is displayed on the touch panel, and wait for a progress bar to finish
  3. The printer reboots, and you may set up your printer or skip the steps
  4. Select USB File, then delete the firmware files (ChituUpgrade.bin, and FPGA_v3218.RBF)
  5. Unplug the USB drive
  6. Done

*Note:

  • After the update is completed, the USB drive is recommended to be formatted again to avoid plugging into other models of printers which may lead to printer failure
 

Updating firmware for Sonic Mini 8K, Sonic Mega 8K, Sonic Mighty 4K, Sonic Mini 4K, Sonic Mini and Sonic 4K

Printer Download Release Date File Size
Sonic Mini 8K 20220728_Mini-8K-V453-1.5-PH04-f3616-1.5ui 2022-07-28 1.8 MB
Sonic Mega 8K 20220429_Mega-8K_V451-1.3-PH01-f3220-1.5ui.rar 2022-04-29 2.1 MB
Sonic Mighty 4K 20210930_Mighty-4K-EN_V444-f222.rar 2021-10-20 814 KB
Sonic Mini 4K 20210930_Mini-4K-EN_V444-f218.rar 2021-10-20 797 KB
Sonic Mini 20220712_Sonic_Mini-V4318 2022-07-12 212 KB
Sonic 4K 20210930_Sonic-4K-EN_V444-P1-f219.rar 2021-10-20 897 KB
 

Instructions

Download the firmware file to your PC and unzip the .rar file.

  1. Save all files to a clean USB drive. (We recommend formatting the USB drive to FAT32)
  2. Turn off your resin 3D printer, then plug the USB drive into your printer.
  3. Turn on the printer.
  4. The firmware will update automatically.
  5. After three loud beeps, wait for a few seconds, before turning off the printer.
  6. Remove the USB drive.
  7. Firmware update is now complete.
Note:

Once you've successfully updated the firmware on your printer, please format the USB drive in case you've accidentally updated any other device.

 

Phrozen SD IMG File Download

File Download

Here's how you can download firmware for 3D printers using Phrozen OS operating systems.

Printer Download Release Date File Size
Sonic XL 4K 2022 sonic_xl2022_181.img.gz 2022-10-13 536 MB
Sonic 4K 2022 sonic_4k_2022_181.img.gz 2022-10-13 750 MB
Transform Standard transform_200910.img.7z 2020-09-10 678 MB
Transform Dual 5.5” dual55.production.img.7z 2020-02-05 378 MB
Transform Fast transform_fast_292.img.7z 2020-09-30 549 MB
Transform Fast 8.9” tf_894kmono_296.img.7z 2020-10-20 378 MB
Sonic XL 4K sonicXL4K_v2971.img.7z 2020-09-04 307 MB
Sonic sonic_1080p_v296.img.7z 2020-09-04 381 MB
Shuffle 4K shuffle4K_v296.img.7z 2020-08-20 380 MB
Shuffle Lite shuffle_lite_v296.img.7z 2020-09-04 381 MB
Shuffle XL 2019 shuffle_xl_2019_v296.img.7z 2020-09-04 380 MB
Shuffle 2019 shuffle2019_v296.img.7z 2020-09-04 379 MB
Shuffle XL 2018 4K Kit XL2018_89MONO4K_v13.img.7z 2020-09-04 730 MB
Shuffle XL 2018 shuffle_xl2018_50hz.rar 2020-09-04 1.7 GB
shuffle_xl_35hz.img.7z 2020-09-04 392 MB
Shuffle 2018 shuffle2018.img.7z 2020-09-04 1.5 GB
Make Mono 4K Kit make_mono4k.img.7z 2020-11-03 357 MB

 

Instructions

  1. Download one of the following SD card formatting software:
    1. SD Formatter: https://www.sdcard.org/downloads/formatter/
    2. Win32: https://win32diskimager.download/
  2. Format the SD card. (Tutorial video)
  3. Download the firmware file to your PC, then write in the file to the SD card.
  4. The firmware update is now complete.
Tip:
For detailed steps on how to reflash the SD card or the update procedure, please check this post.
  

Leave a comment

All comments are moderated before being published