Raise3D is bringing two new large-format fused-filament printers to Formnext in Frankfurt, November 17–20, 2026. The company’s November announcement puts both models at Hall 12.1, Booth D21. Raise3D’s product announcement and official booth information.
Two build sizes for different jobs
- T450: 450 × 350 × 400 mm build volume and an actively heated chamber rated up to 70 °C.
- T700: 700 × 500 × 1,000 mm build volume and an actively heated chamber rated up to 60 °C.
Those are manufacturer specifications. A taller chamber can make it feasible to print a fixture or pattern in one piece. Whether your part fits also depends on supports, orientation and clearance. For a production decision, compare the assembly time of a segmented print with the risk and duration of a single long build.
Run a representative ABS test
Raise3D lists ABS among its supported material families. For shops evaluating third-party filament, ANTINSKY ABS 1.75 mm filament is an option for a small qualification print. Confirm spool setup, ventilation requirements and slicer settings before trying it on either model. Start with a sample that reproduces the corners and wall thickness of the intended part, then measure it after cooling. Raise3D’s published profiles and test results are specific to the materials it names. Raise3D technical specifications.

Cover image from the Raise3D press release.