Bambu Lab Bambu Dual-Sided Smooth PEI Plate - A1 mini - Antinsky3d
拡大するには画像をロールオーバー 拡大するには画像をクリック
Bambu Lab Bambu Dual-Sided Smooth PEI Plate - A1 mini - Antinsky3d

Bambu Lab Bambu Dual-Sided Smooth PEI Plate - A1 mini

Bambu Lab
価格:
$24.99

説明

Bambu Smooth PEI Plate, High Z-axis precision printing, Smooth and matte surface finish

 

Recommended Settings

Please note that other slicer settings might need to be adjusted based on the printed model and the filament requirements

Materials Heatbed Temperature Glue Stick Required?
PLA/PLA-CF/PLA-GF 45~60℃ No
PETG/PETG-CF 60~80℃ Glue Stick/Liquid Glue
TPU 35~45℃ Glue Stick/Liquid Glue
PVA 45~60℃ Glue Stick/Liquid Glue



High Z-axis precision printing

The use of a Smooth PEI Plate contributes to improved Z-axis precision during the printing process, ensuring greater accuracy and consistency in the vertical dimension. These qualities make the Smooth PEI Plate an excellent choice for printing parts that demand a high level of fit accuracy, where precise alignment and tight tolerances are crucial.




Surface Finish

Smooth and Matte surface finish

The use of a specially selected matte PEI sheet can impart a smooth and matte texture to the bottom surface of the printed object, enhancing its overall appearance

Compatibility with various filaments, especially for PLA

PEI enables printing not only with common materials such as PLA, TPU, PETG and PVA. Note: Please apply liquid glue or a glue stick to prevent the sheet from tearing if print filament other than PLA

Considerations

 

  • If bubbles appear on the bottom of the sheet, heating it on the heatbed at a temperature of no less than 80 degrees for several hours can be helpful in eliminating the bubbles.

  • Deposition of dust and grease on the build plate decrease adhesion. It is recommended to regularly clean the surface with detergent and water to to maintain best adhesion.

  • Do not clean the Smooth PEI with Acetone, as it will damage the PEI surface.

  • Always wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.

  • Carefully sanding the surface with fine-grit (600 was recommended) sandpaper can help restore adhesion.

  • The Smooth PEI plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.


    Installation Steps

    Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you

    Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you

    Step 2: Lower the plate and secure to the magnetic platform

    Step 2: Lower the plate and secure to the magnetic platform

    Product Specification

    Material
    Dual-sided PEI Sheet+ Spring Steel
    Surface temperature resistance
    		 Up to 120℃
    Flexible stainless steel plate thickness
    0.4 mm
    Dual-sided PEI sheet thickness
    0.125 mm
    Usable print size
    180*180 mm
    Package size
    220*190*15 mm
    Package weight
    230 g
    Color
    Black

    • You may also like

    Recently viewed