説明
Founded in 2002, Shenzhen eSUN Industrial Co., Ltd. is a national high-tech enterprise, a national strategic emerging industry new material project undertaker, and one of China's top ten biodegradable enterprises.
Description
High impact resistance and good printability of PLA; Suitable for mechanical parts prototypes with requirements for rigidity and impact resistance; Wear-resistant performance makes it suitable for printing gears and can be used as temporary functional parts.
Sellingpoint
High rigidity
High impact resistance
High wear resistance
Excellent printability
1. ePLA-GF line has strong rigidity and is not easy to bend. In the feeding pipeline, excessive bending of filament should be avoided as far as possible
2. ePLA-GF is very easy to grind the nozzle and extruder gear. It is recommended to use hardened steel nozzle or ruby nozzle. If conditions permit, hardened steel extruder gear can be selected. If the printing time is long and the plug occurs, the throat and nozzle need to be replaced
3. The blowing fan can be properly turned off to improve the model strength
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | ePLA-GF |
| Density(g/cm3) | 1.31 |
| Heat Distortion Temp(℃,0.45MPa) | 56 5/10 |
| Melt Flow Index(g/10min) | 6.36（190℃/2.16kg） |
| Tensile Strength(MPa) | 59.27 7/10 |
| Elongation at Break(%) | 7.99 1/10 |
| Flexural Strength(MPa) | 85.01 8/10 |
| Flexural Modulus(MPa) | 4414.89 8/10 |
| IZOD Impact Strength(kJ/㎡) | 10.16 2/10 |
| Durability | 4/10 |
| Printability | 9/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 190 – 230℃ Recommended temperature：215℃ |
| Bed temperature(℃) | 45 – 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces |
Masking paper, PVP solid glue, PEI |