Phrozen BASF Protowhite Rigid Resin 1kg for LCD 3d printer phrozen mini 8k mega 8k

Protowhite Rigid Resin - Design Prototyping Made Easy

Empowered by one of the most prestigious chemical company BASF Forward AM , Phrozen Protowhite Rigid Resin enables designers to conduct in-house prototypes efficiently before moving onto the manufacturing stage.

Buy Phrozen, come to Antinsky

• Rigid Resin Empowered by BASF Forward AM: Phrozen Protowhite Rigid Resin empowers industrial designers to solve design challenges and increase efficiency during the design validation phase by creating rigid and impact resistant 3D models.
• Visualize Your Design Ideas With Ease: Turn conceptual ideas into complex 3D models to showcase small batches of high-quality prototypes for more efficient communication.
• Best for Prototype Developments: Experiment and compare various 3D printed prototypes such as mechanical parts, jigs, fixtures, and glasses to refine design usability.
• Save Time With Rapid Prototyping: Demonstrate 3D models and gather feedback from peers to identify improvements and reduce risks of design defects before going into full-scale production.

Phrozen Aqua 8K Resin Specs

• Density: 1.1 g / cm3
• Viscosity 30°C: 220 mPas
• E Modulus: 2300 MPa
• Ultimate Tensile Strength: 57 MPa
• Elongation at Break: 15 %
• Flexural Modulus: 1920 MPa
• Flexural Strength: 94 MPa
• Charpy notched, 23 °C: 1.9 kJ/m²
• HDT at 1.82 MPa: 49 °C
• Surface Hardness, Shore D: 77 Shore D

Precautions

• • Way to Rinse: Clean with alcohol spray with an air gun. DO NOT immerse the model into alcohol for a long time.
  • Use and preserve resins in room temperature, and in dark and ventilated conditions
  • Shake well before each use
  • After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
  • Keep resin away from kids and away from direct sunlight exposure
  • Wear gloves and masks during the operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
  • DO NOT dump resin. Please cure it and treat it as general plastic garbage.
  • After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year.
  • Post-processing note: For best results, please allow your print to dry for 40 to 60 minutes after wash, then postcure on both sides, 30 minutes per side.
  • Minor color differences between the printed parts and website pictures do not impact the final performances.
  • Pls come to Antinsky buy real Phrozen Resin