ANTINSKY FilaBox D100 is a 2-in-1 sealed storage box and constant-temperature drying chamber designed specifically for 3D-printing filaments.
Its compact body measures approximately 295 × 120 × 265 mm and accepts standard spools up to Ø205 mm, supporting 1.75 / 2.85 / 3.00 mm diameters
and common materials such as PLA, PETG, ABS, and Nylon.
Key Features
- Six-level constant-temperature heating from 45–65 °C, each optimized for different filaments
- Adjustable timer from 0–48 h with 0.5 h precision countdown
- Real-time alternating temperature & humidity display (10–90 % RH)
- Transparent lid for instant visual check of remaining filament and color
- Plug-and-play 24 V ⎓ 2 A OEM adapter, max 48 W
Three-Step Operation
1. Open the lid, place the spool inside, feed the filament through any outlet, and add desiccant in the spool core.
2. Close the lid and snap the sealing latch. Short-press the power button → select temperature/time → drying starts.
3. When finished, unplug the adapter, reinsert the outlet plugs, and the box becomes a long-term moisture-proof storage container.
Safety Reminders
Always remove the outlet plugs while drying. If condensation fogs the lid, open it briefly to release moisture before continuing. Do not leave the unit
unattended in continuous heating mode.
Retail Price: $39.99