The problem that Creality 3D Cleaning and curing machine 02 all-in-one cleaning and curing machine cannot be used
<span;>Problem description: I. When executing the cleaning procedure
1. Put the bottled alcohol on the machine.
2. Cover with orange shell.
3. Set the mode to wash
4. Set the speed to fast
5. Time setting
6. Press the Run button.
Problem occurs: the machine 3 does not work after the sound
2、 When performing the curing procedure
1. Remove the alcohol barrel
2. Place the rotary table
3. Set the mode to UV
4. Set the speed to normal speed
5. Set time
6. Press the run button
Problem occurs: the machine 3 does not work after the sound
Solution:
1. Re cover the orange plastic bucket
2. The optocoupler switch at the back of the machine does not detect the cover, so try again after pasting a piece of paper on the back cover
How to slove Creality 3D Cleaning and curing machine
