Описание
[High strength and high modulus] Stable physical and mechanical properties. The strength performance is much higher than other resins. Fully cured products have excellent mechanical properties and can be used for high-temperature dental membranes to meet the complex needs of dental model assembly and manufacturing.
[High precision, smooth and delicate surface] This fast resin has good molding effects. The surface of the printing model is smooth and delicate, meeting the precise printing requirements of the printing model.
"Low viscosity and excellent fluidity" can be easily removed from the platform after formation, while maintaining the printing characteristics of the printing model. Improve printing efficiency and extend the service life of printing models.
[Professional for LCD] Designed for LED light sources to achieve better print quality. Using high-quality pigments and light starters, the resin printed model has a very pure and amazing color effect, just like an artwork.
What is High Temp Resin?
- High Temp Resin has the characteristics of high hardness, high strength, high modulus, and high precision. Good temperature resistance,Resistance to long-term heating at 120°C or boiling at 100°C.The fully cured material has excellent mechanical properties, weather resistance and temperature resistance.
- High Temp Resin can be Used in medical, dental, automotive, consumer electronics and other models that require temperature resistance or strength. It can be used for high temperature dental film and meet the refined needs of dental model assembly manufacturing, withstand high temperature and in low deformation.
High Temperature ResistanceIt needs to be fully cured for more than 10 minutes after printing, then put in 150℃ oven to bake for 30 minutes. |
High Precision & Low ShrinkageThe acrylate monomers reduce the volume shrinkage during the photocuring process, which lead to the high precision of the print model with a smooth finish and detail clearly display. |
Parameter information:
Exposure parameters: Bottom exposure time(s)20-60s, normal exposure time(s) 2.5-10s
Lifting Speed: 50-150/mm·min-1
Decline Speed: 150-200/mm·min-1
Number of bottom layers: 3-5
How to Use:
1.Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
2.Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
3.Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
4.Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more)
How to Storage:
1.Keep away from sunlight, sealed at room temperature.
2.Do not pour the resin in the resin vat into the unused resin, please store in other clean container and seal with plastic wrap, then put in an environment free from ultraviolet light.
3.Recommended to save at 15 ℃ -35 ℃ ambient temperature.