Описание
Phrozen Castable Resin W20
Shipping From China
Phrozen Castable Resin W20 Green is developed for reliable casting with clean burnout and zero ash content. It is designed for both jewelry and dental casting, specifically fine and delicate features such as milgrain, micro claw, and wired patterns plus engraved and raised text.
Phrozen Castable Resin W20 Benefits
- 20% wax content.
- Formulated for casting light to medium pieces.
- Low shrinkage, high precision. Produces prints with smooth and crisp surface finishing.
- With a minimal number of gates, you can easily cast anything you desire. Set up your printed models and clean up casted 3D models effortlessly.
- No foul nor strong odor.
Phrozen ABS-like Resins Specs
- Quantity: 500g per bottle
- Recommended layer height: 50 um
- Verified clean burnout with these investments: "Prestige Optima", "Plasticast" and "Ultravest Maxx"
- Surface hardness: Shore D 50-55
- Ash content: 0.0-0.1% (ASTM E1131; TGA)
Tips:
- XY resolution：0.050 mm
- Shake well before use.
- Check your recommended resin profiles parameters according to your 3D printer. Click here to find your resin profile.
- We recommend washing your prints with 95% IPA and drying it with an air gun.
- Note: Please don’t soak your prints in 95% IPA for over 30 seconds at a time.
Precautions
- Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
- After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
- Keep resin away from kids and away from direct sunlight exposure.
- Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
- DO NOT dump resin. Please cure it and treat it as general plastic garbage.