One. Problem description
After the fine model printing is completed, the precision is lost, which shows that the size of the gap is larger, and the model is out of shape, more than curing.
Two. Solution idea
1. Check whether it is level
2. Check whether the parameters set by the slicing software machine are incorrect
Three. solution
1. Relevel
2. Modify slice parameters as follows:
① Lifting distance, increase the static time after lifting and before return, reduce the lifting speed and static time after return, so that the model has more sufficient resin dripping time.
③ Check whether overexposure causes more than curing, it is recommended to do UV test.