ANTINSKY
Warenkorb 0
  • 3D-Drucker
    • Ergate-01 PRO Harzdrucker
    • Industrielle 3D-Drucker
    • Vollfarb-3D-Drucker
    • UV-Nachhärtegerät
    • Filament-Trockenschrank
  • Harz
    • Standardharz
    • Dekorharz
    • Dentalharz
    • Gießharz
    • Technisches Harz
    • Harzfarbstoff
  • Filament
    • PLA
      • Alle PLA & PLA+
      • Seiden-PLA
      • Nachleuchtendes PLA
    • PETG
    • ABS & ASA
      • ABS & ABS+
      • ASA
    • Flexibles TPU
    • Nylon (PA)
    • PPS
    • PVA-Stützfilament
    • PEBA-Filament
  • Trennfolien
    • PFA-Folie (nFEP)
    • ACF-Folie
    • HDF-Folie
  • Druckplatten
    • Druckplatten für Bambu Lab
    • Druckplatten für Creality
    • Druckplatte für Snapmaker U1
  • Druckerteile
    • Beheizter Harzmischer
    • Filament-Trockenbox
    • Automatischer Filamentzuführer
    • Düsen für Bambu Lab
    • Extruderteile
  • Marken
    • Phaetus
      • DXC
      • Rapido
      • Hotends
      • Weitere Produkte
    • BlueCast
    • Creality
    • Hanboost
Mein Konto
Anmeldung Registrieren
ANTINSKY
Konto Wunschzettel Warenkorb 0
  • 3D-Drucker
    • Ergate-01 PRO Harzdrucker
    • Industrielle 3D-Drucker
    • Vollfarb-3D-Drucker
    • UV-Nachhärtegerät
    • Filament-Trockenschrank
    Ergate-01 PRO
    16K-Display für feine Harzdetails.
    S130-SLM-3D-Drucker
    Metalldruck mit 500-W-Faserlaser.
    ANTBULL656
    Bauraum von 600 × 500 × 600 mm.
    J45-Vollfarb-3D-Drucker
    Mehrere Farben in einem Druckauftrag.
    Antmega Cure
    UV-Nachhärtung für Harzdrucke.
    FDC12-Filamenttrockner
    Aktive Trocknung für bis zu 12 Spulen.
  • Harz
    • Standardharz
    • Dekorharz
    • Dentalharz
    • Gießharz
    • Technisches Harz
    • Harzfarbstoff
    Standard Lite-Harz
    Für Alltagsmodelle und Prototypen.
    Standard Tough-Harz
    Zähes Harz für funktionale Prototypen.
    ABS-Like BJD-Harz
    Für Kugelgelenkpuppen und Figurenteile.
    Standard-Harz
    Für Alltagsmodelle und Prototypen.
    Waschbares 8K-Harz
    Steife Drucke mit feinen Details.
    Nachleuchtendes Harz
    Leuchtet nach vorheriger Lichteinwirkung.
    ABS-Like-Harz
    Zähes Harz für funktionale Prototypen.
    Detail Master-Harz
    Feine Details für Miniaturen.
    Heavy Metal-Harz
    Metallische Optik für Ausstellungsmodelle.
    Macaron-Harz
    Sanft matte Oberfläche für Dekodrucke.
    Crystal Bicolor-Harz
    Zweifarbiger Effekt für Ausstellungsmodelle.
    Superklares Harz
    Transparente Modelle und Prototypen.
    Harz für provisorische Dentalmodelle
    Für provisorische Dentalmodelle.
    Dental-Schablonenharz
    Transparentes Harz für Bohrschablonen.
    Prothesenbasisharz
    Für gedruckte Prothesenbasen.
    Flexibles Prothesenbasisharz
    Flexibles Harz für Prothesenbasen.
    Dentalmodellharz
    Für gedruckte Dentalformen und -modelle.
    Aufbissschienenharz
    Für gedruckte Aufbissschienen.
    Standard-Dentalmodellharz
    Für gedruckte dentale Studienmodelle.
    Smart-Dentalgießharz
    Für dentale Gussmodelle.
    Dentales Gießharz
    Für dentale Gussmodelle.
    Wasserwaschbares Dentalmodellharz
    Wasserwaschbares Harz für Dentalmodelle.
    Gingivaharz
    Für Zahnfleischmasken auf Dentalmodellen.
    Abdrucklöffelharz
    Für individuelle dentale Abdrucklöffel.
    Smart-Dentalgießharz
    Für dentale Gussmodelle.
    Dentales Gießharz
    Für dentale Gussmodelle.
    Smart-Schmuckgießharz
    Für Schmuckmodelle im Feinguss.
    Schmuckgießharz
    Für Schmuckmodelle im Feinguss.
    W80-Schmuckgießharz
    Für Schmuckmodelle im Feinguss.
    Keramikähnliches Harz
    Glatte Oberfläche mit Keramikoptik.
    Engineering SG-Harz
    ABS-ähnliche Eigenschaften für Prototypen.
    Schlagfestes Engineering-Harz
    Schlagfest für funktionale Bauteile.
    Hochzähes Harz
    Zähere Bauteile für häufige Handhabung.
    Flammhemmendes Harz
    Für Drucke mit Anforderungen an den Flammschutz.
    Elastic Pro-Harz
    Elastisches Material für Polsterstrukturen.
    Hochtemperaturharz
    Für Bauteile mit hoher Wärmebelastung.
    Elastic Pro+-Harz
    Elastisches Material für Polsterstrukturen.
    Antistatisches Harz
    Für Bauteile mit antistatischen Anforderungen.
    Elastisches Harz
    Flexible Teile zum Biegen und Stauchen.
    Harzfarbstoff
    Färbt kompatible Harze ein.
  • Filament
    • PLA
    • PETG
    • ABS & ASA
    • Flexibles TPU
    • Nylon (PA)
    • PPS
    • PVA-Stützfilament
    • PEBA-Filament
    Alle PLA & PLA+
    PLA+-Filament
    Schnelles PLA für den täglichen 3D-Druck.
    Mattes PLA
    Mattes Finish für Funktions- und Dekodrucke.
    UV-farbwechselndes PLA
    Ändert sein Aussehen unter UV-Licht.
    PLA in Steinoptik
    Steinoptik für dekorative Drucke.
    Seiden-PLA
    Seiden-PLA
    Glänzendes Seidenfinish für Ausstellungsstücke.
    Zweifarbiges Seiden-PLA
    Zwei Farbtöne aus verschiedenen Blickwinkeln.
    Dreifarbiges Seiden-PLA
    Drei Farbtöne aus verschiedenen Blickwinkeln.
    Regenbogen-Seiden-PLA
    Regenbogenverlauf mit glänzendem Seidenfinish.
    Zweifarbiges Seiden-PLA
    Kompakte Spule zum Testen zweifarbiger Effekte.
    Nachleuchtendes PLA
    Nachleuchtendes Seiden-PLA
    Seidenglanz mit nachleuchtendem Effekt.
    Mehrfarbiges Leucht-PLA
    Leuchtet nach vorheriger Lichteinwirkung.
    Nachleuchtendes PLA
    Leuchtet nach vorheriger Lichteinwirkung.
    PETG-Filament
    Für funktionale Bauteile und Prototypen.
    Mattes PETG
    Mattes Finish für Funktions- und Dekodrucke.
    PETG-CF-Filament
    Kohlefaserverstärktes PETG für funktionale Teile.
    Regenbogen-PETG
    Sanfte Farbverläufe im gedruckten Teil.
    Nachleuchtendes PETG
    PETG mit nachleuchtendem Effekt.
    ABS & ABS+
    ABS-Filament
    Für funktionale Bauteile und Gehäuse.
    ABS+-Filament
    Für funktionale Bauteile und Prototypen.
    ABS-CF-Filament
    Kohlefaserverstärktes ABS für funktionale Teile.
    ABS-FR-Filament
    Flammhemmendes ABS für funktionale Drucke.
    ASA
    ASA-Filament
    Für Außeneinsatz und funktionale Bauteile.
    ASA-CF-Filament
    Kohlefaserverstärktes ASA für steife Bauteile.
    TPU 85A
    Weicheres TPU für flexible Drucke.
    TPU 90A
    Flexible Drucke mit Shore-Härte 90A.
    TPU 95A
    Flexible Drucke mit Shore-Härte 95A.
    TPU 95A HS
    Flexibles TPU für schnellen Druck.
    TPU-LW 90A
    Schäumendes TPU für leichte Polsterungen.
    PA12-Filament
    Nylon für funktionale FDM-Bauteile.
    PA12-CF-Filament
    Kohlefaserverstärktes Nylon für steife Teile.
    PPA-CF30 HT
    30 % Kohlefaser für steife Bauteile.
    PPS-CF-Filament
    Kohlefaserverstärkung für technische Bauteile.
    PPS-GF-Filament
    Glasfaserverstärkung für steife Bauteile.
    PVA-Stützfilament
    Wasserlösliche Stützen für kompatible Drucker.
    PEBA 98A
    Flexibles Filament mit hoher Rückstellkraft.
  • Trennfolien
    • PFA-Folie (nFEP)
    • ACF-Folie
    • HDF-Folie
    PFA nFEP-Folie
    280 × 450 mm Folie für Harztanks.
    PFA nFEP-Folie
    220 × 310 mm Folie für Harztanks.
    PFA nFEP-Folie
    160 × 235 mm Folie für Harztanks.
    ACF-Folie
    280 × 450 mm Folie für Harztanks.
    ACF-Folie
    220 × 310 mm Folie für Harztanks.
    ACF-Folie
    160 × 235 mm Folie für Harztanks.
    HDF-Folie
    280 × 450 mm Folie für Harztanks.
    HDF-Folie
    220 × 310 mm Folie für Harztanks.
  • Druckplatten
    • Druckplatten für Bambu Lab
    • Druckplatten für Creality
    • Druckplatte für Snapmaker U1
    PEI-Kaltdruckplatte
    Kalte PEI-Oberfläche auf flexibler Platte.
    Glatte PEI-Druckplatte
    Beidseitig glattes PEI auf Federstahl.
    PEI-Kaltdruckplatte für K2 Plus
    Passend zur Bauplattform des K2 Plus.
    PEI-Kaltdruckplatte für U1
    Passend zum Magnetbett des U1.
  • Druckerteile
    • Beheizter Harzmischer
    • Filament-Trockenbox
    • Automatischer Filamentzuführer
    • Düsen für Bambu Lab
    • Extruderteile
    HeatMixer HM100
    Mischt und erwärmt Harz vor dem Drucken.
    FilaBox
    Trocknet Filament vor dem Drucken.
    Automatischer Filamentzuführer
    Automatische Zufuhr für 1,75-mm-Filament.
    P1/X1-Wolframdüse
    Verschleißfest für abrasive Filamente.
    H2-Düse
    Ersatzdüse für Drucker der H2-Serie.
    A1/A2-Wolframdüse
    Verschleißfest für abrasive Filamente.
    A1/A2-Düse
    Ersatzdüse in mehreren Durchmessern.
    H2-Hochdurchflussdüse
    Hoher Durchfluss für schnelleren H2-Druck.
    P2-Düse
    Ersatzdüse in mehreren Durchmessern.
    A1-Extruderzahnrad
    Ersatz-Antriebsrad für den A1.
  • Marken
    • Phaetus
    • BlueCast
    • Creality
    • Hanboost
    DXC
    DXC2-Extruder
    Filamentantrieb für kompatible FDM-Aufbauten.
    DXC-Extruder
    Filamentantrieb für kompatible FDM-Aufbauten.
    Rapido
    Rapido X-Hotend
    Mit Liber-Hochdurchflussmodul.
    Rapido 2 Plus-Hotend
    Hotend für kompatible FDM-Drucker.
    Rapido 2-Hotend
    Hotend für kompatible FDM-Drucker.
    Rapido 2F-Hotend
    Ultrahoher Durchfluss mit PT1000-Sensor.
    Hotends
    Liber U1-Hotend
    0,4-mm-Hochdurchfluss-Hotend für U1.
    Conch Plus-Hotend für P2S
    0,4-mm-Hotend für den P2S.
    Conch M4-Hotend für P2S
    0,4-mm-EndCoat-Düse für den P2S.
    Conch M6-Hotend
    0,4-mm-Hotend für die X1/P1-Serie.
    Conch M4-Hotend
    0,4-mm-EndCoat-Düse für H2D/A1/A1 Mini.
    Conch Plus-Hotend für X1/P1
    0,4-mm-Hotend für die X1/P1-Serie.
    Weitere Produkte
    APUS 2-Extruder
    Filamentantrieb mit zwei Zahnrädern.
    X-WAX
    Gießbares Wachsharz für Mono-LCD/DLP.
    X-One V2
    Für Schmuckmodelle im Feinguss.
    X5-Gießharz
    Feine Gravuren für den Schmuckguss.
    X-Filigree V2
    Gießharz für filigrane Schmuckmodelle.
    X10-Gießharz
    Formstabil für detailreiche Gussteile.
    Cr3a-Gießharz
    Einfache Nachbearbeitung für den Schmuckguss.
    X-WAX Filigree
    Gießharz für filigrane Schmuckmodelle.
    X-Nova
    Nach dem Härten flexibel zum Steinbesatz.
    Model HR-Harz
    Glatte Urmodelle für den Formenbau.
    K1 Max
    Bauraum von 300 × 300 × 300 mm.
    K2 Plus Combo
    Mit System für mehrfarbigen Filamentdruck.
    K1C
    Für kompatible Kohlefaserfilamente.
    C1-Ultraschallschneider
    Kabelloses Schneiden für Modellbau und Basteln.

Durchsuchen Sie unseren Shop

ANTINSKY
Konto Wunschzettel Warenkorb 0
Menü
3D-Drucker
Harz
Filament
Trennfolien
Druckplatten
Druckerteile
Marken
Ergate-01 PRO Harzdrucker
Ergate-01 PRO
16K-Display für feine Harzdetails.
Industrielle 3D-Drucker
S130-SLM-3D-Drucker
Metalldruck mit 500-W-Faserlaser.
$30,000.00
ANTBULL656
Bauraum von 600 × 500 × 600 mm.
$7,500.00
Vollfarb-3D-Drucker
J45-Vollfarb-3D-Drucker
Mehrere Farben in einem Druckauftrag.
UV-Nachhärtegerät
Antmega Cure
UV-Nachhärtung für Harzdrucke.
Filament-Trockenschrank
FDC12-Filamenttrockner
Aktive Trocknung für bis zu 12 Spulen.
Standardharz
Standard Lite-Harz
Für Alltagsmodelle und Prototypen.
$10.90
Standard Tough-Harz
Zähes Harz für funktionale Prototypen.
$19.90
ABS-Like BJD-Harz
Für Kugelgelenkpuppen und Figurenteile.
$13.90
Standard-Harz
Für Alltagsmodelle und Prototypen.
$14.90
Waschbares 8K-Harz
Steife Drucke mit feinen Details.
$16.90
Nachleuchtendes Harz
Leuchtet nach vorheriger Lichteinwirkung.
$23.00
ABS-Like-Harz
Zähes Harz für funktionale Prototypen.
$13.90
Detail Master-Harz
Feine Details für Miniaturen.
$29.90
Dekorharz
Heavy Metal-Harz
Metallische Optik für Ausstellungsmodelle.
$21.99
Macaron-Harz
Sanft matte Oberfläche für Dekodrucke.
$17.90
Crystal Bicolor-Harz
Zweifarbiger Effekt für Ausstellungsmodelle.
$26.90
Superklares Harz
Transparente Modelle und Prototypen.
$49.90
Dentalharz
Harz für provisorische Dentalmodelle
Für provisorische Dentalmodelle.
$39.90
Dental-Schablonenharz
Transparentes Harz für Bohrschablonen.
$64.99
Prothesenbasisharz
Für gedruckte Prothesenbasen.
$44.90
Flexibles Prothesenbasisharz
Flexibles Harz für Prothesenbasen.
$29.90
Dentalmodellharz
Für gedruckte Dentalformen und -modelle.
$56.90
Aufbissschienenharz
Für gedruckte Aufbissschienen.
$56.90
Standard-Dentalmodellharz
Für gedruckte dentale Studienmodelle.
$18.90
Smart-Dentalgießharz
Für dentale Gussmodelle.
$59.90
Dentales Gießharz
Für dentale Gussmodelle.
$52.90
Wasserwaschbares Dentalmodellharz
Wasserwaschbares Harz für Dentalmodelle.
$49.00
Gingivaharz
Für Zahnfleischmasken auf Dentalmodellen.
$44.90
Abdrucklöffelharz
Für individuelle dentale Abdrucklöffel.
$16.99
Gießharz
Smart-Dentalgießharz
Für dentale Gussmodelle.
$59.90
Dentales Gießharz
Für dentale Gussmodelle.
$52.90
Smart-Schmuckgießharz
Für Schmuckmodelle im Feinguss.
$59.90
Schmuckgießharz
Für Schmuckmodelle im Feinguss.
$56.90
W80-Schmuckgießharz
Für Schmuckmodelle im Feinguss.
$59.90
Technisches Harz
Keramikähnliches Harz
Glatte Oberfläche mit Keramikoptik.
$49.00
Engineering SG-Harz
ABS-ähnliche Eigenschaften für Prototypen.
$66.90
Schlagfestes Engineering-Harz
Schlagfest für funktionale Bauteile.
$59.00
Hochzähes Harz
Zähere Bauteile für häufige Handhabung.
$38.90
Flammhemmendes Harz
Für Drucke mit Anforderungen an den Flammschutz.
$39.90
Elastic Pro-Harz
Elastisches Material für Polsterstrukturen.
$69.00
Hochtemperaturharz
Für Bauteile mit hoher Wärmebelastung.
$42.90
Elastic Pro+-Harz
Elastisches Material für Polsterstrukturen.
$49.00
Antistatisches Harz
Für Bauteile mit antistatischen Anforderungen.
$39.90
Elastisches Harz
Flexible Teile zum Biegen und Stauchen.
$39.90
Harzfarbstoff
Harzfarbstoff
Färbt kompatible Harze ein.
PLA
Alle PLA & PLA+
PLA+-Filament
Schnelles PLA für den täglichen 3D-Druck.
Mattes PLA
Mattes Finish für Funktions- und Dekodrucke.
UV-farbwechselndes PLA
Ändert sein Aussehen unter UV-Licht.
PLA in Steinoptik
Steinoptik für dekorative Drucke.
Seiden-PLA
Seiden-PLA
Glänzendes Seidenfinish für Ausstellungsstücke.
Zweifarbiges Seiden-PLA
Zwei Farbtöne aus verschiedenen Blickwinkeln.
Dreifarbiges Seiden-PLA
Drei Farbtöne aus verschiedenen Blickwinkeln.
Regenbogen-Seiden-PLA
Regenbogenverlauf mit glänzendem Seidenfinish.
Zweifarbiges Seiden-PLA
Kompakte Spule zum Testen zweifarbiger Effekte.
Nachleuchtendes PLA
Nachleuchtendes Seiden-PLA
Seidenglanz mit nachleuchtendem Effekt.
Mehrfarbiges Leucht-PLA
Leuchtet nach vorheriger Lichteinwirkung.
Nachleuchtendes PLA
Leuchtet nach vorheriger Lichteinwirkung.
PETG
PETG-Filament
Für funktionale Bauteile und Prototypen.
Mattes PETG
Mattes Finish für Funktions- und Dekodrucke.
PETG-CF-Filament
Kohlefaserverstärktes PETG für funktionale Teile.
Regenbogen-PETG
Sanfte Farbverläufe im gedruckten Teil.
Nachleuchtendes PETG
PETG mit nachleuchtendem Effekt.
ABS & ASA
ABS & ABS+
ABS-Filament
Für funktionale Bauteile und Gehäuse.
ABS+-Filament
Für funktionale Bauteile und Prototypen.
ABS-CF-Filament
Kohlefaserverstärktes ABS für funktionale Teile.
ABS-FR-Filament
Flammhemmendes ABS für funktionale Drucke.
ASA
ASA-Filament
Für Außeneinsatz und funktionale Bauteile.
ASA-CF-Filament
Kohlefaserverstärktes ASA für steife Bauteile.
Flexibles TPU
TPU 85A
Weicheres TPU für flexible Drucke.
TPU 90A
Flexible Drucke mit Shore-Härte 90A.
TPU 95A
Flexible Drucke mit Shore-Härte 95A.
TPU 95A HS
Flexibles TPU für schnellen Druck.
TPU-LW 90A
Schäumendes TPU für leichte Polsterungen.
Nylon (PA)
PA12-Filament
Nylon für funktionale FDM-Bauteile.
PA12-CF-Filament
Kohlefaserverstärktes Nylon für steife Teile.
PPA-CF30 HT
30 % Kohlefaser für steife Bauteile.
PPS
PPS-CF-Filament
Kohlefaserverstärkung für technische Bauteile.
PPS-GF-Filament
Glasfaserverstärkung für steife Bauteile.
PVA-Stützfilament
PVA-Stützfilament
Wasserlösliche Stützen für kompatible Drucker.
PEBA-Filament
PEBA 98A
Flexibles Filament mit hoher Rückstellkraft.
PFA-Folie (nFEP)
PFA nFEP-Folie
280 × 450 mm Folie für Harztanks.
$14.90
PFA nFEP-Folie
220 × 310 mm Folie für Harztanks.
$8.90
PFA nFEP-Folie
160 × 235 mm Folie für Harztanks.
$10.00
ACF-Folie
ACF-Folie
280 × 450 mm Folie für Harztanks.
$24.90
ACF-Folie
220 × 310 mm Folie für Harztanks.
$14.90
ACF-Folie
160 × 235 mm Folie für Harztanks.
$9.90
HDF-Folie
HDF-Folie
280 × 450 mm Folie für Harztanks.
$28.00
HDF-Folie
220 × 310 mm Folie für Harztanks.
$16.00
Druckplatten für Bambu Lab
PEI-Kaltdruckplatte
Kalte PEI-Oberfläche auf flexibler Platte.
$10.90
Glatte PEI-Druckplatte
Beidseitig glattes PEI auf Federstahl.
$9.90
Druckplatten für Creality
PEI-Kaltdruckplatte für K2 Plus
Passend zur Bauplattform des K2 Plus.
$19.99
Druckplatte für Snapmaker U1
PEI-Kaltdruckplatte für U1
Passend zum Magnetbett des U1.
Beheizter Harzmischer
HeatMixer HM100
Mischt und erwärmt Harz vor dem Drucken.
Filament-Trockenbox
FilaBox
Trocknet Filament vor dem Drucken.
Automatischer Filamentzuführer
Automatischer Filamentzuführer
Automatische Zufuhr für 1,75-mm-Filament.
Düsen für Bambu Lab
P1/X1-Wolframdüse
Verschleißfest für abrasive Filamente.
$16.90
H2-Düse
Ersatzdüse für Drucker der H2-Serie.
$4.90
A1/A2-Wolframdüse
Verschleißfest für abrasive Filamente.
$16.90
A1/A2-Düse
Ersatzdüse in mehreren Durchmessern.
$4.90
H2-Hochdurchflussdüse
Hoher Durchfluss für schnelleren H2-Druck.
$5.90
P2-Düse
Ersatzdüse in mehreren Durchmessern.
$4.90
Extruderteile
A1-Extruderzahnrad
Ersatz-Antriebsrad für den A1.
Phaetus
DXC
DXC2-Extruder
Filamentantrieb für kompatible FDM-Aufbauten.
$59.99
DXC-Extruder
Filamentantrieb für kompatible FDM-Aufbauten.
$45.99
Rapido
Rapido X-Hotend
Mit Liber-Hochdurchflussmodul.
$89.00
Rapido 2 Plus-Hotend
Hotend für kompatible FDM-Drucker.
$99.00
Rapido 2-Hotend
Hotend für kompatible FDM-Drucker.
$89.00
Rapido 2F-Hotend
Ultrahoher Durchfluss mit PT1000-Sensor.
$109.00
Hotends
Liber U1-Hotend
0,4-mm-Hochdurchfluss-Hotend für U1.
$34.99
Conch Plus-Hotend für P2S
0,4-mm-Hotend für den P2S.
$33.90
Conch M4-Hotend für P2S
0,4-mm-EndCoat-Düse für den P2S.
$23.90
Conch M6-Hotend
0,4-mm-Hotend für die X1/P1-Serie.
$21.90
Conch M4-Hotend
0,4-mm-EndCoat-Düse für H2D/A1/A1 Mini.
$24.90
Conch Plus-Hotend für X1/P1
0,4-mm-Hotend für die X1/P1-Serie.
$46.90
Weitere Produkte
APUS 2-Extruder
Filamentantrieb mit zwei Zahnrädern.
$49.50
BlueCast
X-WAX
Gießbares Wachsharz für Mono-LCD/DLP.
$129.00
X-One V2
Für Schmuckmodelle im Feinguss.
$129.00
X5-Gießharz
Feine Gravuren für den Schmuckguss.
$129.00
X-Filigree V2
Gießharz für filigrane Schmuckmodelle.
$129.00
X10-Gießharz
Formstabil für detailreiche Gussteile.
$129.00
Cr3a-Gießharz
Einfache Nachbearbeitung für den Schmuckguss.
$79.00
X-WAX Filigree
Gießharz für filigrane Schmuckmodelle.
$129.00
X-Nova
Nach dem Härten flexibel zum Steinbesatz.
$79.00
Model HR-Harz
Glatte Urmodelle für den Formenbau.
$160.00
Creality
K1 Max
Bauraum von 300 × 300 × 300 mm.
$799.00
K2 Plus Combo
Mit System für mehrfarbigen Filamentdruck.
$1,299.00
K1C
Für kompatible Kohlefaserfilamente.
$509.00
Hanboost
C1-Ultraschallschneider
Kabelloses Schneiden für Modellbau und Basteln.
$159.00
Konto Merkliste Warenkorb
Nachrichten

Cold Plate vs Heated Bed: The Complete First-Layer Adhesion Guide

von ANTINSKY An Sep 28, 2026

First-layer adhesion is the single most common reason a 3D print fails. A print that lifts at the corner, warps off the plate, or refuses to stick at all is not a filament problem, a slicer problem, or a printer problem — it is a surface-and-temperature problem. Understanding how adhesion actually works turns constant troubleshooting into a set of deliberate choices.

This guide covers the full picture: how build surfaces and bed temperature interact, when a cold plate beats a heated bed, how to dial in first-layer settings, and how to match the surface to the material you are printing. By the end you will have a repeatable system instead of a pile of failed first layers.

What Actually Makes a Print Stick?

Adhesion is a balance of three forces: mechanical grip between the filament and the surface texture, chemical affinity between the polymer and the coating, and thermal bonding driven by bed temperature. Every material and every surface changes how these three combine.

Too little of any one and the part lifts. Too much and the part fuses to the plate, tears, or rips the coating. The art of first-layer tuning is finding the window where a part holds firmly during printing and releases cleanly when cool.

  • Mechanical grip comes from surface texture — textured PEI, rough glass, or a frosted cold plate.
  • Chemical affinity comes from coatings like PEI, glue stick, or specialized adhesives.
  • Thermal bonding comes from holding the bed near the material's glass-transition behavior.

Heated Beds: The Traditional Approach

For a decade the standard answer to adhesion was heat. A heated bed keeps the first layers warm, which slows cooling and reduces the thermal contraction that causes warping. For materials with high shrinkage — ABS, ASA, nylon, polycarbonate — a heated bed plus an enclosure is still the correct answer.

Heated beds bring tradeoffs. High bed temperatures increase power draw, add warm-up time, and can bake residue onto the plate. They also do not solve warping on their own for high-shrinkage materials — without an enclosure, the part still cools unevenly from the top down.

Material Typical Bed Temp Surface
PLA 55–65 °C PEI, textured PEI, or cold plate
PETG 70–85 °C Textured PEI (avoid bare glass)
ABS / ASA 90–110 °C PEI + enclosure
TPU 40–60 °C PEI or glue on glass
Nylon 70–100 °C Garolite or PEI + enclosure

Cold Plates: Adhesion Without Heat

Cold plates flip the model. Instead of relying on thermal bonding, they use a specialized high-grip coating that grabs the first layer mechanically and chemically at room temperature — no bed heating required. The plate usually needs no glue, no tape, and no warm-up.

The advantages are significant. There is no heat-up wait, less power draw, and no baked-on residue. For PLA and PETG, a good cold plate can out-perform a heated bed for convenience and consistency. Best of all, parts often pop off cleanly once cool because the grip drops as temperature falls.

For Bambu Lab owners, the ANTINSKY Cold PEI Build Plate for Bambu Lab brings this no-heat workflow to a huge installed base. If you run a large-format machine, the ANTINSKY Cold PEI Build Plate for Creality K2 Plus delivers the same grip at 370 × 370 mm. And for a conventional heated setup, the ANTINSKY PEI Smooth Build Plate remains the reliable workhorse.

Cold Plate vs Heated Bed: Direct Comparison

Factor Cold Plate Heated Bed
Warm-up time None 2–10 minutes
Power draw Low High
Best for PLA/PETG Excellent Good
Best for ABS/ASA/Nylon Limited Required
Warping control Good with part cooling Better with enclosure
Release when cool Very easy Easy to moderate
Maintenance Wipe with IPA occasionally Scrape/clean residue

The short version: cold plates win for PLA and PETG on open-frame printers, and heated beds remain necessary for high-shrinkage engineering materials. Many makers use both — a cold plate for fast everyday PLA prints and a heated PEI sheet for ABS, ASA, and nylon.

How to Dial In the Perfect First Layer

Adhesion is 80% setup and 20% surface. Work through these steps in order.

  1. Clean the plate. Wash with warm water and dish soap, dry, then wipe with IPA. Finger oils are the number-one adhesion killer.
  2. Level and set Z-offset. The nozzle should just kiss the first layer. Too high and the line is round and loose; too low and it is thin and translucent.
  3. Set first-layer settings. Slow first layer speed (20–30 mm/s), wider first-layer line width (110–120%), and higher first-layer temperature.
  4. Control cooling. Keep part cooling low or off for the first few layers so the plastic bonds before it hardens.
  5. Add a brim for tricky parts. Tall, thin, or sharp-cornered parts benefit from a brim.

Material-Specific Notes

PLA is the easiest material to stick and the easiest to over-squish. It works beautifully on cold plates and textured PEI, and it releases cleanly once cool. A quality PLA like ANTINSKY PLA+ prints with predictable adhesion across most surfaces.

PETG is the adhesion trap. It bonds too well to bare glass and plain PEI — it can rip chunks out of the coating. Use a textured surface, a cold plate, or a light glue-stick release layer. The ANTINSKY PETG prints cleanly once your bed temperature and offset are dialed in.

TPU is forgiving because it is flexible, but it needs a slow first layer and good grip so it does not drag. A 95A TPU with a low first-layer speed sticks well on PEI.

ABS, ASA, and nylon need heat plus an enclosure. No cold plate will save a large ABS part from warping on an open printer.

Adhesion Problems and Their Fixes

Problem Likely Cause Fix
Part lifts at corners Cooling too fast / dirty plate Clean plate, raise bed temp, lower part cooling
First layer too thin Z-offset too low Raise nozzle slightly
First layer gaps Z-offset too high / under-extrusion Lower nozzle, check flow
Part fused to plate Too much squish or wrong surface Raise Z-offset, add release layer
Adhesion fades over time Oils, residue, worn coating Clean or replace the plate

Maintaining Your Build Surface

Even the best plate degrades with use. Wipe it with IPA between prints, avoid touching the printable area, and never scrape with metal tools that gouge the coating. When adhesion starts to fade no matter how you tune, the surface is worn — replacing the sheet is cheaper than fighting it. Keep a spare plate on hand so a bad surface never stalls production.

Why Warping Actually Happens

Warping is thermal mechanics, not chemistry. As each new layer is laid down hot and cools, it contracts. If the part is free to move, it simply shrinks. If it is stuck to the bed, the contracting layers pull against the bonded first layer, building up stress. Once that stress exceeds the bond strength, the corner lifts.

Three levers control this. Reduce the temperature difference between the extruded plastic and the environment (heat the chamber). Slow the cooling (reduce part cooling). And increase bond strength (a grippier surface and a slightly squished first layer). High-shrinkage materials like ABS shrink 0.5–0.8% as they cool; low-shrinkage materials like PLA shrink far less. This is why the same part prints flawlessly in PLA and warps instantly in ABS on the same machine.

Ambient Temperature and Enclosures

Room temperature matters more than most people realize. A cold draft near an open-frame printer can lift a PLA part that would otherwise print perfectly. Moving the printer away from windows, doors, and air-conditioning vents is a free fix that solves a surprising number of "mystery" warping cases.

For engineering materials, an enclosure is not optional. It traps heat, slows cooling, and stabilizes the environment so the part contracts evenly. Combining an enclosure with a heated bed is what makes large ABS, ASA, and nylon parts possible. Without both, you are fighting physics with slicer settings alone.

Choosing Your First Build Surface

If you print mostly PLA and PETG, start with a cold plate — it is the lowest-friction entry point and needs no heat or glue. If you print a mix that includes ABS or nylon, choose a PEI sheet and a heated bed, because you will need temperature on your side.

A practical setup for most makers is two surfaces: a cold plate for fast everyday PLA/PETG work and a textured PEI sheet for everything else. Swapping a flexible sheet is far faster than fighting a compromised coating, and it lets you dedicate each surface to the materials it handles best.

Removing Prints Without Damaging the Plate

How you remove a part is as important as how you make it stick. Let the plate cool first — most grips drop sharply as temperature falls, so the part often releases on its own. Use a flexible plate: bend it gently and the part pops off. Avoid metal scrapers on coated surfaces, never pry against the coating, and clean the plate immediately after removal so residue does not bake on during the next print.

Rough removal is a leading cause of scratched coatings and mysterious loss of adhesion. Treat the surface as a consumable to be protected, not a tool to be forced.

Bed Leveling and Z-Offset: The Real Foundation

No surface or temperature can rescue a machine with an inconsistent first layer. Bed leveling ensures the nozzle sits the same distance from the plate everywhere; Z-offset sets that distance. If the left corner is squished and the right corner is loose, adhesion will fail unevenly no matter what else you change.

Modern printers usually handle leveling automatically with a mesh probe, but the Z-offset still needs a deliberate tune. Print a single-layer patch and read it. A good first layer is smooth, slightly flattened, and uniform, with adjacent lines just touching and no gaps between them. Lines that are round and separated mean the nozzle is too high. Lines that are translucent, over-squished, or rippled mean it is too low.

Dial the offset in small steps — 0.01–0.02 mm at a time — and re-check. Once you find the sweet spot, save it and record it. A well-set offset is stable across many prints, so this is a one-time investment that pays back on every job. Re-check it after swapping nozzles, changing a plate, or moving the printer.

Frequently Asked Questions

Do I really need a heated bed for PLA?

No. PLA adheres well at room temperature on a cold plate or textured PEI. A heated bed at 55–65 °C helps consistency slightly but is not required.

Can I use a cold plate for PETG?

Yes — cold plates are actually ideal for PETG because they prevent the over-bonding that damages glass and smooth PEI. Always let the part cool before removing it.

Why does my print stick during printing but warp later?

That is a warping problem, not an adhesion problem. The first layer bonded, but the part cooled unevenly and pulled itself up. Use an enclosure and reduce cooling for high-shrinkage materials.

How often should I clean my build plate?

Wipe with IPA before every print, and give it a soap-and-water wash every 10–20 prints or whenever adhesion weakens.

Is glue stick necessary?

Not for PLA on PEI or a cold plate. Glue is a release agent — it helps PETG and TPU detach without damaging the surface.

What is the best bed temperature for PETG?

Start at 80 °C and adjust from there. Too hot causes elephant-foot and over-bonding; too cool causes lifting.

Do I need a heated bed for ABS or ASA?

Yes, always — a heated bed at 90–110 °C plus an enclosure is required to control warping. A cold plate alone cannot hold a large ABS or ASA part, because the part cools unevenly and pulls itself off the plate from the top down.

Final Thoughts

Cold plates and heated beds are not rivals — they are tools for different jobs. Use a cold plate for fast, clean PLA and PETG printing on open-frame machines, and rely on a heated bed (plus an enclosure) for engineering materials. Clean your surface, set your Z-offset precisely, and slow down the first layer, and the majority of adhesion failures simply disappear.

Find build plates, PEI sheets, and filaments tuned for reliable adhesion at ANTINSKY.

Stichworte: Adhesion, Build Plate, Cold Plate, First Layer, PEI
Vorherige
Dental Resin 3D Printing: The Complete Guide to Models, Splints, Dentures & Temporaries
Nächste
Engineering Resin Selection Guide: High-Temp, High-Tough, Flame-Retardant & Anti-Static

In Verbindung stehende Artikel

Co Print’s official Quadro 3D printer product image

Co Print Quadro Takes Four Independent Toolheads to Formnext 2026

Raise3D press image of T450 and T700 large-format 3D printers

Raise3D Brings Large-Format T450 and T700 Printers to Formnext 2026

ANTINSKY Antmega Cure UV Resin Curing Machine

Set Up a Resin Post-Curing Station with ANTINSKY Antmega Cure

InfiMech official MX Pro chamber heating illustration

InfiMech MX Series Sets November 10 Kickstarter Launch for Tool-Changing Printers

Hinterlasse einen Kommentar

Deine Email-Adresse wird nicht veröffentlicht.

Schnelllink

  • Drucker
  • Filamente
  • Filmveröffentlichung
  • Bauplatten
  • Zubehör
  • Partner-Marken
  • Blog

Firma

  • Suchen
  • Über uns
  • Kontaktieren Sie uns
  • Allgemeine Geschäftsbedingungen
  • Datenschutzerklärung
  • Immaterialgüterrechte
  • Versand
  • Allgemeine Geschäftsbedingungen
  • Rückerstattungsrichtlinie
  • Blog

ANTINSKY ist ein bekannter Hersteller von 3D-Drucker-Zubehör und hat seit vielen Jahren eine vertiefte Zusammenarbeit mit vielen 3D-Drucker-Marken, sodass unsere Zubehörteile wie Entformungsfolien, Harze, Filamente usw. eine beeindruckende Wirkung erzielen.

Wir sind der Überzeugung, dass die 3D-Druck-Technologie in der Zukunft mehr Träume für die Welt verwirklichen kann. Zu diesem Zweck vergessen wir unsere ursprüngliche Absicht nicht und gehen voran.

Bitte besuchen Sie die offizielle Website, um weitere Markeninformationen und Neuigkeiten zu erhalten.

© Antinsky 2026
Warenkorb 0

Einkaufswagen

Ihr Warenkorb ist derzeit leer.
Fügen Sie eine Notiz für den Verkäufer hinzu
Versandkosten ermitteln
Fügen Sie einen Rabattcode hinzu
null
Zwischensumme $0.00
Warenkorb ansehen