ANTINSKY
Warenkorb 0
  • 3D-Drucker
    • Ergate-01 PRO Harzdrucker
    • Industrielle 3D-Drucker
    • Vollfarb-3D-Drucker
    • UV-Nachhärtegerät
    • Filament-Trockenschrank
  • Harz
    • Standardharz
    • Dekorharz
    • Dentalharz
    • Gießharz
    • Technisches Harz
    • Harzfarbstoff
  • Filament
    • PLA
      • Alle PLA & PLA+
      • Seiden-PLA
      • Nachleuchtendes PLA
    • PETG
    • ABS & ASA
      • ABS & ABS+
      • ASA
    • Flexibles TPU
    • Nylon (PA)
    • PPS
    • PVA-Stützfilament
    • PEBA-Filament
  • Trennfolien
    • PFA-Folie (nFEP)
    • ACF-Folie
    • HDF-Folie
  • Druckplatten
    • Druckplatten für Bambu Lab
    • Druckplatten für Creality
    • Druckplatte für Snapmaker U1
  • Druckerteile
    • Beheizter Harzmischer
    • Filament-Trockenbox
    • Automatischer Filamentzuführer
    • Düsen für Bambu Lab
    • Extruderteile
  • Marken
    • Phaetus
      • DXC
      • Rapido
      • Hotends
      • Weitere Produkte
    • BlueCast
    • Creality
    • Hanboost
Mein Konto
Anmeldung Registrieren
ANTINSKY
Konto Wunschzettel Warenkorb 0
  • 3D-Drucker
    • Ergate-01 PRO Harzdrucker
    • Industrielle 3D-Drucker
    • Vollfarb-3D-Drucker
    • UV-Nachhärtegerät
    • Filament-Trockenschrank
    Ergate-01 PRO
    16K-Display für feine Harzdetails.
    S130-SLM-3D-Drucker
    Metalldruck mit 500-W-Faserlaser.
    ANTBULL656
    Bauraum von 600 × 500 × 600 mm.
    J45-Vollfarb-3D-Drucker
    Mehrere Farben in einem Druckauftrag.
    Antmega Cure
    UV-Nachhärtung für Harzdrucke.
    FDC12-Filamenttrockner
    Aktive Trocknung für bis zu 12 Spulen.
  • Harz
    • Standardharz
    • Dekorharz
    • Dentalharz
    • Gießharz
    • Technisches Harz
    • Harzfarbstoff
    Standard Lite-Harz
    Für Alltagsmodelle und Prototypen.
    Standard Tough-Harz
    Zähes Harz für funktionale Prototypen.
    ABS-Like BJD-Harz
    Für Kugelgelenkpuppen und Figurenteile.
    Standard-Harz
    Für Alltagsmodelle und Prototypen.
    Waschbares 8K-Harz
    Steife Drucke mit feinen Details.
    Nachleuchtendes Harz
    Leuchtet nach vorheriger Lichteinwirkung.
    ABS-Like-Harz
    Zähes Harz für funktionale Prototypen.
    Detail Master-Harz
    Feine Details für Miniaturen.
    Heavy Metal-Harz
    Metallische Optik für Ausstellungsmodelle.
    Macaron-Harz
    Sanft matte Oberfläche für Dekodrucke.
    Crystal Bicolor-Harz
    Zweifarbiger Effekt für Ausstellungsmodelle.
    Superklares Harz
    Transparente Modelle und Prototypen.
    Harz für provisorische Dentalmodelle
    Für provisorische Dentalmodelle.
    Dental-Schablonenharz
    Transparentes Harz für Bohrschablonen.
    Prothesenbasisharz
    Für gedruckte Prothesenbasen.
    Flexibles Prothesenbasisharz
    Flexibles Harz für Prothesenbasen.
    Dentalmodellharz
    Für gedruckte Dentalformen und -modelle.
    Aufbissschienenharz
    Für gedruckte Aufbissschienen.
    Standard-Dentalmodellharz
    Für gedruckte dentale Studienmodelle.
    Smart-Dentalgießharz
    Für dentale Gussmodelle.
    Dentales Gießharz
    Für dentale Gussmodelle.
    Wasserwaschbares Dentalmodellharz
    Wasserwaschbares Harz für Dentalmodelle.
    Gingivaharz
    Für Zahnfleischmasken auf Dentalmodellen.
    Abdrucklöffelharz
    Für individuelle dentale Abdrucklöffel.
    Smart-Dentalgießharz
    Für dentale Gussmodelle.
    Dentales Gießharz
    Für dentale Gussmodelle.
    Smart-Schmuckgießharz
    Für Schmuckmodelle im Feinguss.
    Schmuckgießharz
    Für Schmuckmodelle im Feinguss.
    W80-Schmuckgießharz
    Für Schmuckmodelle im Feinguss.
    Keramikähnliches Harz
    Glatte Oberfläche mit Keramikoptik.
    Engineering SG-Harz
    ABS-ähnliche Eigenschaften für Prototypen.
    Schlagfestes Engineering-Harz
    Schlagfest für funktionale Bauteile.
    Hochzähes Harz
    Zähere Bauteile für häufige Handhabung.
    Flammhemmendes Harz
    Für Drucke mit Anforderungen an den Flammschutz.
    Elastic Pro-Harz
    Elastisches Material für Polsterstrukturen.
    Hochtemperaturharz
    Für Bauteile mit hoher Wärmebelastung.
    Elastic Pro+-Harz
    Elastisches Material für Polsterstrukturen.
    Antistatisches Harz
    Für Bauteile mit antistatischen Anforderungen.
    Elastisches Harz
    Flexible Teile zum Biegen und Stauchen.
    Harzfarbstoff
    Färbt kompatible Harze ein.
  • Filament
    • PLA
    • PETG
    • ABS & ASA
    • Flexibles TPU
    • Nylon (PA)
    • PPS
    • PVA-Stützfilament
    • PEBA-Filament
    Alle PLA & PLA+
    PLA+-Filament
    Schnelles PLA für den täglichen 3D-Druck.
    Mattes PLA
    Mattes Finish für Funktions- und Dekodrucke.
    UV-farbwechselndes PLA
    Ändert sein Aussehen unter UV-Licht.
    PLA in Steinoptik
    Steinoptik für dekorative Drucke.
    Seiden-PLA
    Seiden-PLA
    Glänzendes Seidenfinish für Ausstellungsstücke.
    Zweifarbiges Seiden-PLA
    Zwei Farbtöne aus verschiedenen Blickwinkeln.
    Dreifarbiges Seiden-PLA
    Drei Farbtöne aus verschiedenen Blickwinkeln.
    Regenbogen-Seiden-PLA
    Regenbogenverlauf mit glänzendem Seidenfinish.
    Zweifarbiges Seiden-PLA
    Kompakte Spule zum Testen zweifarbiger Effekte.
    Nachleuchtendes PLA
    Nachleuchtendes Seiden-PLA
    Seidenglanz mit nachleuchtendem Effekt.
    Mehrfarbiges Leucht-PLA
    Leuchtet nach vorheriger Lichteinwirkung.
    Nachleuchtendes PLA
    Leuchtet nach vorheriger Lichteinwirkung.
    PETG-Filament
    Für funktionale Bauteile und Prototypen.
    Mattes PETG
    Mattes Finish für Funktions- und Dekodrucke.
    PETG-CF-Filament
    Kohlefaserverstärktes PETG für funktionale Teile.
    Regenbogen-PETG
    Sanfte Farbverläufe im gedruckten Teil.
    Nachleuchtendes PETG
    PETG mit nachleuchtendem Effekt.
    ABS & ABS+
    ABS-Filament
    Für funktionale Bauteile und Gehäuse.
    ABS+-Filament
    Für funktionale Bauteile und Prototypen.
    ABS-CF-Filament
    Kohlefaserverstärktes ABS für funktionale Teile.
    ABS-FR-Filament
    Flammhemmendes ABS für funktionale Drucke.
    ASA
    ASA-Filament
    Für Außeneinsatz und funktionale Bauteile.
    ASA-CF-Filament
    Kohlefaserverstärktes ASA für steife Bauteile.
    TPU 85A
    Weicheres TPU für flexible Drucke.
    TPU 90A
    Flexible Drucke mit Shore-Härte 90A.
    TPU 95A
    Flexible Drucke mit Shore-Härte 95A.
    TPU 95A HS
    Flexibles TPU für schnellen Druck.
    TPU-LW 90A
    Schäumendes TPU für leichte Polsterungen.
    PA12-Filament
    Nylon für funktionale FDM-Bauteile.
    PA12-CF-Filament
    Kohlefaserverstärktes Nylon für steife Teile.
    PPA-CF30 HT
    30 % Kohlefaser für steife Bauteile.
    PPS-CF-Filament
    Kohlefaserverstärkung für technische Bauteile.
    PPS-GF-Filament
    Glasfaserverstärkung für steife Bauteile.
    PVA-Stützfilament
    Wasserlösliche Stützen für kompatible Drucker.
    PEBA 98A
    Flexibles Filament mit hoher Rückstellkraft.
  • Trennfolien
    • PFA-Folie (nFEP)
    • ACF-Folie
    • HDF-Folie
    PFA nFEP-Folie
    280 × 450 mm Folie für Harztanks.
    PFA nFEP-Folie
    220 × 310 mm Folie für Harztanks.
    PFA nFEP-Folie
    160 × 235 mm Folie für Harztanks.
    ACF-Folie
    280 × 450 mm Folie für Harztanks.
    ACF-Folie
    220 × 310 mm Folie für Harztanks.
    ACF-Folie
    160 × 235 mm Folie für Harztanks.
    HDF-Folie
    280 × 450 mm Folie für Harztanks.
    HDF-Folie
    220 × 310 mm Folie für Harztanks.
  • Druckplatten
    • Druckplatten für Bambu Lab
    • Druckplatten für Creality
    • Druckplatte für Snapmaker U1
    PEI-Kaltdruckplatte
    Kalte PEI-Oberfläche auf flexibler Platte.
    Glatte PEI-Druckplatte
    Beidseitig glattes PEI auf Federstahl.
    PEI-Kaltdruckplatte für K2 Plus
    Passend zur Bauplattform des K2 Plus.
    PEI-Kaltdruckplatte für U1
    Passend zum Magnetbett des U1.
  • Druckerteile
    • Beheizter Harzmischer
    • Filament-Trockenbox
    • Automatischer Filamentzuführer
    • Düsen für Bambu Lab
    • Extruderteile
    HeatMixer HM100
    Mischt und erwärmt Harz vor dem Drucken.
    FilaBox
    Trocknet Filament vor dem Drucken.
    Automatischer Filamentzuführer
    Automatische Zufuhr für 1,75-mm-Filament.
    P1/X1-Wolframdüse
    Verschleißfest für abrasive Filamente.
    H2-Düse
    Ersatzdüse für Drucker der H2-Serie.
    A1/A2-Wolframdüse
    Verschleißfest für abrasive Filamente.
    A1/A2-Düse
    Ersatzdüse in mehreren Durchmessern.
    H2-Hochdurchflussdüse
    Hoher Durchfluss für schnelleren H2-Druck.
    P2-Düse
    Ersatzdüse in mehreren Durchmessern.
    A1-Extruderzahnrad
    Ersatz-Antriebsrad für den A1.
  • Marken
    • Phaetus
    • BlueCast
    • Creality
    • Hanboost
    DXC
    DXC2-Extruder
    Filamentantrieb für kompatible FDM-Aufbauten.
    DXC-Extruder
    Filamentantrieb für kompatible FDM-Aufbauten.
    Rapido
    Rapido X-Hotend
    Mit Liber-Hochdurchflussmodul.
    Rapido 2 Plus-Hotend
    Hotend für kompatible FDM-Drucker.
    Rapido 2-Hotend
    Hotend für kompatible FDM-Drucker.
    Rapido 2F-Hotend
    Ultrahoher Durchfluss mit PT1000-Sensor.
    Hotends
    Liber U1-Hotend
    0,4-mm-Hochdurchfluss-Hotend für U1.
    Conch Plus-Hotend für P2S
    0,4-mm-Hotend für den P2S.
    Conch M4-Hotend für P2S
    0,4-mm-EndCoat-Düse für den P2S.
    Conch M6-Hotend
    0,4-mm-Hotend für die X1/P1-Serie.
    Conch M4-Hotend
    0,4-mm-EndCoat-Düse für H2D/A1/A1 Mini.
    Conch Plus-Hotend für X1/P1
    0,4-mm-Hotend für die X1/P1-Serie.
    Weitere Produkte
    APUS 2-Extruder
    Filamentantrieb mit zwei Zahnrädern.
    X-WAX
    Gießbares Wachsharz für Mono-LCD/DLP.
    X-One V2
    Für Schmuckmodelle im Feinguss.
    X5-Gießharz
    Feine Gravuren für den Schmuckguss.
    X-Filigree V2
    Gießharz für filigrane Schmuckmodelle.
    X10-Gießharz
    Formstabil für detailreiche Gussteile.
    Cr3a-Gießharz
    Einfache Nachbearbeitung für den Schmuckguss.
    X-WAX Filigree
    Gießharz für filigrane Schmuckmodelle.
    X-Nova
    Nach dem Härten flexibel zum Steinbesatz.
    Model HR-Harz
    Glatte Urmodelle für den Formenbau.
    K1 Max
    Bauraum von 300 × 300 × 300 mm.
    K2 Plus Combo
    Mit System für mehrfarbigen Filamentdruck.
    K1C
    Für kompatible Kohlefaserfilamente.
    C1-Ultraschallschneider
    Kabelloses Schneiden für Modellbau und Basteln.

Durchsuchen Sie unseren Shop

ANTINSKY
Konto Wunschzettel Warenkorb 0
Menü
3D-Drucker
Harz
Filament
Trennfolien
Druckplatten
Druckerteile
Marken
Ergate-01 PRO Harzdrucker
Ergate-01 PRO
16K-Display für feine Harzdetails.
Industrielle 3D-Drucker
S130-SLM-3D-Drucker
Metalldruck mit 500-W-Faserlaser.
$30,000.00
ANTBULL656
Bauraum von 600 × 500 × 600 mm.
$7,500.00
Vollfarb-3D-Drucker
J45-Vollfarb-3D-Drucker
Mehrere Farben in einem Druckauftrag.
UV-Nachhärtegerät
Antmega Cure
UV-Nachhärtung für Harzdrucke.
Filament-Trockenschrank
FDC12-Filamenttrockner
Aktive Trocknung für bis zu 12 Spulen.
Standardharz
Standard Lite-Harz
Für Alltagsmodelle und Prototypen.
$10.90
Standard Tough-Harz
Zähes Harz für funktionale Prototypen.
$19.90
ABS-Like BJD-Harz
Für Kugelgelenkpuppen und Figurenteile.
$13.90
Standard-Harz
Für Alltagsmodelle und Prototypen.
$14.90
Waschbares 8K-Harz
Steife Drucke mit feinen Details.
$16.90
Nachleuchtendes Harz
Leuchtet nach vorheriger Lichteinwirkung.
$23.00
ABS-Like-Harz
Zähes Harz für funktionale Prototypen.
$13.90
Detail Master-Harz
Feine Details für Miniaturen.
$29.90
Dekorharz
Heavy Metal-Harz
Metallische Optik für Ausstellungsmodelle.
$21.99
Macaron-Harz
Sanft matte Oberfläche für Dekodrucke.
$17.90
Crystal Bicolor-Harz
Zweifarbiger Effekt für Ausstellungsmodelle.
$26.90
Superklares Harz
Transparente Modelle und Prototypen.
$49.90
Dentalharz
Harz für provisorische Dentalmodelle
Für provisorische Dentalmodelle.
$39.90
Dental-Schablonenharz
Transparentes Harz für Bohrschablonen.
$64.99
Prothesenbasisharz
Für gedruckte Prothesenbasen.
$44.90
Flexibles Prothesenbasisharz
Flexibles Harz für Prothesenbasen.
$29.90
Dentalmodellharz
Für gedruckte Dentalformen und -modelle.
$56.90
Aufbissschienenharz
Für gedruckte Aufbissschienen.
$56.90
Standard-Dentalmodellharz
Für gedruckte dentale Studienmodelle.
$18.90
Smart-Dentalgießharz
Für dentale Gussmodelle.
$59.90
Dentales Gießharz
Für dentale Gussmodelle.
$52.90
Wasserwaschbares Dentalmodellharz
Wasserwaschbares Harz für Dentalmodelle.
$49.00
Gingivaharz
Für Zahnfleischmasken auf Dentalmodellen.
$44.90
Abdrucklöffelharz
Für individuelle dentale Abdrucklöffel.
$16.99
Gießharz
Smart-Dentalgießharz
Für dentale Gussmodelle.
$59.90
Dentales Gießharz
Für dentale Gussmodelle.
$52.90
Smart-Schmuckgießharz
Für Schmuckmodelle im Feinguss.
$59.90
Schmuckgießharz
Für Schmuckmodelle im Feinguss.
$56.90
W80-Schmuckgießharz
Für Schmuckmodelle im Feinguss.
$59.90
Technisches Harz
Keramikähnliches Harz
Glatte Oberfläche mit Keramikoptik.
$49.00
Engineering SG-Harz
ABS-ähnliche Eigenschaften für Prototypen.
$66.90
Schlagfestes Engineering-Harz
Schlagfest für funktionale Bauteile.
$59.00
Hochzähes Harz
Zähere Bauteile für häufige Handhabung.
$38.90
Flammhemmendes Harz
Für Drucke mit Anforderungen an den Flammschutz.
$39.90
Elastic Pro-Harz
Elastisches Material für Polsterstrukturen.
$69.00
Hochtemperaturharz
Für Bauteile mit hoher Wärmebelastung.
$42.90
Elastic Pro+-Harz
Elastisches Material für Polsterstrukturen.
$49.00
Antistatisches Harz
Für Bauteile mit antistatischen Anforderungen.
$39.90
Elastisches Harz
Flexible Teile zum Biegen und Stauchen.
$39.90
Harzfarbstoff
Harzfarbstoff
Färbt kompatible Harze ein.
PLA
Alle PLA & PLA+
PLA+-Filament
Schnelles PLA für den täglichen 3D-Druck.
Mattes PLA
Mattes Finish für Funktions- und Dekodrucke.
UV-farbwechselndes PLA
Ändert sein Aussehen unter UV-Licht.
PLA in Steinoptik
Steinoptik für dekorative Drucke.
Seiden-PLA
Seiden-PLA
Glänzendes Seidenfinish für Ausstellungsstücke.
Zweifarbiges Seiden-PLA
Zwei Farbtöne aus verschiedenen Blickwinkeln.
Dreifarbiges Seiden-PLA
Drei Farbtöne aus verschiedenen Blickwinkeln.
Regenbogen-Seiden-PLA
Regenbogenverlauf mit glänzendem Seidenfinish.
Zweifarbiges Seiden-PLA
Kompakte Spule zum Testen zweifarbiger Effekte.
Nachleuchtendes PLA
Nachleuchtendes Seiden-PLA
Seidenglanz mit nachleuchtendem Effekt.
Mehrfarbiges Leucht-PLA
Leuchtet nach vorheriger Lichteinwirkung.
Nachleuchtendes PLA
Leuchtet nach vorheriger Lichteinwirkung.
PETG
PETG-Filament
Für funktionale Bauteile und Prototypen.
Mattes PETG
Mattes Finish für Funktions- und Dekodrucke.
PETG-CF-Filament
Kohlefaserverstärktes PETG für funktionale Teile.
Regenbogen-PETG
Sanfte Farbverläufe im gedruckten Teil.
Nachleuchtendes PETG
PETG mit nachleuchtendem Effekt.
ABS & ASA
ABS & ABS+
ABS-Filament
Für funktionale Bauteile und Gehäuse.
ABS+-Filament
Für funktionale Bauteile und Prototypen.
ABS-CF-Filament
Kohlefaserverstärktes ABS für funktionale Teile.
ABS-FR-Filament
Flammhemmendes ABS für funktionale Drucke.
ASA
ASA-Filament
Für Außeneinsatz und funktionale Bauteile.
ASA-CF-Filament
Kohlefaserverstärktes ASA für steife Bauteile.
Flexibles TPU
TPU 85A
Weicheres TPU für flexible Drucke.
TPU 90A
Flexible Drucke mit Shore-Härte 90A.
TPU 95A
Flexible Drucke mit Shore-Härte 95A.
TPU 95A HS
Flexibles TPU für schnellen Druck.
TPU-LW 90A
Schäumendes TPU für leichte Polsterungen.
Nylon (PA)
PA12-Filament
Nylon für funktionale FDM-Bauteile.
PA12-CF-Filament
Kohlefaserverstärktes Nylon für steife Teile.
PPA-CF30 HT
30 % Kohlefaser für steife Bauteile.
PPS
PPS-CF-Filament
Kohlefaserverstärkung für technische Bauteile.
PPS-GF-Filament
Glasfaserverstärkung für steife Bauteile.
PVA-Stützfilament
PVA-Stützfilament
Wasserlösliche Stützen für kompatible Drucker.
PEBA-Filament
PEBA 98A
Flexibles Filament mit hoher Rückstellkraft.
PFA-Folie (nFEP)
PFA nFEP-Folie
280 × 450 mm Folie für Harztanks.
$14.90
PFA nFEP-Folie
220 × 310 mm Folie für Harztanks.
$8.90
PFA nFEP-Folie
160 × 235 mm Folie für Harztanks.
$10.00
ACF-Folie
ACF-Folie
280 × 450 mm Folie für Harztanks.
$24.90
ACF-Folie
220 × 310 mm Folie für Harztanks.
$14.90
ACF-Folie
160 × 235 mm Folie für Harztanks.
$9.90
HDF-Folie
HDF-Folie
280 × 450 mm Folie für Harztanks.
$28.00
HDF-Folie
220 × 310 mm Folie für Harztanks.
$16.00
Druckplatten für Bambu Lab
PEI-Kaltdruckplatte
Kalte PEI-Oberfläche auf flexibler Platte.
$10.90
Glatte PEI-Druckplatte
Beidseitig glattes PEI auf Federstahl.
$9.90
Druckplatten für Creality
PEI-Kaltdruckplatte für K2 Plus
Passend zur Bauplattform des K2 Plus.
$19.99
Druckplatte für Snapmaker U1
PEI-Kaltdruckplatte für U1
Passend zum Magnetbett des U1.
Beheizter Harzmischer
HeatMixer HM100
Mischt und erwärmt Harz vor dem Drucken.
Filament-Trockenbox
FilaBox
Trocknet Filament vor dem Drucken.
Automatischer Filamentzuführer
Automatischer Filamentzuführer
Automatische Zufuhr für 1,75-mm-Filament.
Düsen für Bambu Lab
P1/X1-Wolframdüse
Verschleißfest für abrasive Filamente.
$16.90
H2-Düse
Ersatzdüse für Drucker der H2-Serie.
$4.90
A1/A2-Wolframdüse
Verschleißfest für abrasive Filamente.
$16.90
A1/A2-Düse
Ersatzdüse in mehreren Durchmessern.
$4.90
H2-Hochdurchflussdüse
Hoher Durchfluss für schnelleren H2-Druck.
$5.90
P2-Düse
Ersatzdüse in mehreren Durchmessern.
$4.90
Extruderteile
A1-Extruderzahnrad
Ersatz-Antriebsrad für den A1.
Phaetus
DXC
DXC2-Extruder
Filamentantrieb für kompatible FDM-Aufbauten.
$59.99
DXC-Extruder
Filamentantrieb für kompatible FDM-Aufbauten.
$45.99
Rapido
Rapido X-Hotend
Mit Liber-Hochdurchflussmodul.
$89.00
Rapido 2 Plus-Hotend
Hotend für kompatible FDM-Drucker.
$99.00
Rapido 2-Hotend
Hotend für kompatible FDM-Drucker.
$89.00
Rapido 2F-Hotend
Ultrahoher Durchfluss mit PT1000-Sensor.
$109.00
Hotends
Liber U1-Hotend
0,4-mm-Hochdurchfluss-Hotend für U1.
$34.99
Conch Plus-Hotend für P2S
0,4-mm-Hotend für den P2S.
$33.90
Conch M4-Hotend für P2S
0,4-mm-EndCoat-Düse für den P2S.
$23.90
Conch M6-Hotend
0,4-mm-Hotend für die X1/P1-Serie.
$21.90
Conch M4-Hotend
0,4-mm-EndCoat-Düse für H2D/A1/A1 Mini.
$24.90
Conch Plus-Hotend für X1/P1
0,4-mm-Hotend für die X1/P1-Serie.
$46.90
Weitere Produkte
APUS 2-Extruder
Filamentantrieb mit zwei Zahnrädern.
$49.50
BlueCast
X-WAX
Gießbares Wachsharz für Mono-LCD/DLP.
$129.00
X-One V2
Für Schmuckmodelle im Feinguss.
$129.00
X5-Gießharz
Feine Gravuren für den Schmuckguss.
$129.00
X-Filigree V2
Gießharz für filigrane Schmuckmodelle.
$129.00
X10-Gießharz
Formstabil für detailreiche Gussteile.
$129.00
Cr3a-Gießharz
Einfache Nachbearbeitung für den Schmuckguss.
$79.00
X-WAX Filigree
Gießharz für filigrane Schmuckmodelle.
$129.00
X-Nova
Nach dem Härten flexibel zum Steinbesatz.
$79.00
Model HR-Harz
Glatte Urmodelle für den Formenbau.
$160.00
Creality
K1 Max
Bauraum von 300 × 300 × 300 mm.
$799.00
K2 Plus Combo
Mit System für mehrfarbigen Filamentdruck.
$1,299.00
K1C
Für kompatible Kohlefaserfilamente.
$509.00
Hanboost
C1-Ultraschallschneider
Kabelloses Schneiden für Modellbau und Basteln.
$159.00
Konto Merkliste Warenkorb
Nachrichten

Dental Resin 3D Printing: The Complete Guide to Models, Splints, Dentures & Temporaries

von ANTINSKY An Sep 28, 2026

Dental 3D printing has quietly become one of the most practical applications of resin technology in the world. What used to require a plaster lab, multiple impressions, and days of turnaround can now happen in a single appointment — from a chairside intraoral scan to a printed model, guide, splint, or temporary restoration in a matter of hours. The shift is driven by better materials: modern dental resins are formulated for dimensional accuracy, biocompatibility, and the mechanical demands of the mouth.

This guide walks through the entire landscape of dental resin 3D printing — the material categories, the printers and exposure settings that matter, the clinical workflow, and the safety and maintenance habits that keep results consistent. Whether you are a dentist adding a printer to the practice, a lab technician scaling output, or a dental student learning digital workflows, the goal is the same: predictable, repeatable parts.

Why Dental Practices Are Switching to Resin 3D Printing

The traditional dental workflow is a chain of handoffs. A clinician takes an impression, ships it to a lab, waits for a model, and then waits again for the final appliance. Every handoff adds time, cost, and the chance of distortion. Digital dentistry breaks that chain into a closed loop: scan, design, print, finish — all under one roof.

Resin (SLA/LCD/DLP) printing is the right technology for this because dental parts are small, highly detailed, and require smooth surfaces and tight tolerances. FDM printing cannot reliably reproduce the fine margins, occlusal detail, and transparent clarity that dental work demands. Resin printing reaches accuracy in the tens of microns on modern 8K/16K machines, which is exactly the range dental applications live in.

The practical benefits are consistent across every dental lab and clinic:

  • Speed — Same-day models, guides, and temporaries instead of multi-day turnaround.
  • Lower cost per unit — A printed model costs a fraction of a poured stone model.
  • Digital storage — Scans replace physical impressions and shelf space.
  • Reproducibility — Once a recipe works, it works every time.
  • Customization — Every part is designed for one specific patient.

The Main Types of Dental Resin

Dental resin is not one material — it is a family. Choosing the wrong category is the single most common reason a printed dental part fails clinically. The table below summarizes the mainstream categories and what each is actually used for.

Resin Category Typical Application Key Property
Model resin Study models, working dies, aligner models Dimensional stability, smooth surface
Guide / surgical resin Implant guides, drill guides Rigidity, clarity, ability to be sterilized
Splint / night guard resin Occlusal splints, bite guards Toughness, wear resistance, comfort
Denture base resin Denture bases, frameworks Impact strength, precise fit
Temporary resin Provisional crowns, bridges Aesthetics, polishability
Castable resin Metal frameworks, pressable patterns Clean burnout, zero ash residue

A complete digital dental workflow often uses three or four of these categories in the same day. The sections below dig into each one.

Dental Model Resins

Models are the foundation of digital dentistry. An aligner model, a working die, or a study cast must be dimensionally stable, easy to finish, and accurate enough that every subsequent step inherits its precision. A model that shrinks or warps destroys the fit of everything made on top of it.

Modern model resins are filled or semi-filled formulations engineered for low polymerization shrinkage. They print with crisp edges, chamfer cleanly, and resist warping during post-curing because their shrinkage is balanced around a stable matrix. Beige and tooth-colored opacities are popular because they photograph well and look natural in patient-facing documentation.

For a professional-grade option, the ANTINSKY Standard Dental Model Resin is formulated specifically for orthodontic and restorative model work — high accuracy, low shrinkage, and a friendly handling window that novice operators can learn quickly.

Splint, Guide & Occlusal Resins

Splints and night guards live in a punishing mechanical environment. They are bitten thousands of times, flexed, and worn against enamel. This is where toughness and wear resistance become clinically critical — a brittle splint cracks, and a soft one deforms. Tough, wear-resistant formulations are the answer.

Surgical and implant guides have different needs. They must be rigid so the drill enters exactly where the plan says, and they are frequently transparent so the operator can see the osteotomy site through the resin. Guide resin is optimized for clarity, autoclave stability, and dimensional stiffness.

For splints, the ANTINSKY Occlusal Splint Resin delivers the balance of comfort and durability clinicians expect. For transparent implant and drill guides, the ANTINSKY Dental Guide Resin (Clear) is engineered for optical clarity and rigidity, so planning precision carries straight into the mouth.

Denture Base Resins

Denture bases are large, thin, and load-bearing. They must fit the ridge precisely, survive drops, and resist the fatigue of daily chewing and cleaning. Printed denture base resins are formulated for impact strength and low residual monomer, which matters for both patient comfort and regulatory compliance.

Because a denture base is a substantial volume of resin, print orientation and hollowing strategy have an outsized effect on success. Drainage holes, careful support placement on non-fitting surfaces, and adequate post-curing are non-negotiable. The ANTINSKY Denture Base Resin is a drop-in choice for this workflow, tuned for good fit and lasting strength.

Temporary & Castable Dental Resins

Temporary (provisional) restorations bridge the gap between preparation and final delivery. They need to look acceptable, polish to a natural sheen, and hold their shape for weeks. Temporary resin formulations balance aesthetics with enough flexural strength to survive that window.

Castable resins are a different animal entirely. They are burned out and replaced by metal, so the only thing that matters is that the pattern disappears cleanly with minimal ash. Incomplete burnout leaves residue that ruins a casting. High-quality castable resin burns out cleanly at standard dental temperatures.

For temporaries, options such as the ANTINSKY Temporary Dental Model Resin give a workable, tooth-colored provisional with predictable finishing.

The Step-by-Step Dental Resin Workflow

Digital dental printing rewards discipline. The following sequence is the standard workflow used by high-volume labs.

  1. Scan. Capture the patient with an intraoral scanner. Verify margins and occlusion digitally before leaving the chair — rescanning later is expensive.
  2. Design. Use CAD software to design the model, guide, splint, or restoration. Keep wall thickness uniform and respect the resin's minimum feature size.
  3. Nest and orient. Place parts at an angle (typically 15–35°) to reduce cross-section peel forces, and put supports on surfaces that will be finished or trimmed.
  4. Print. Use validated exposure settings for your specific resin and printer. Overexposure loses detail; underexposure leaves soft, sticky surfaces.
  5. Wash. Rinse in clean IPA (or the appropriate solvent) for 2–5 minutes. Dirty solvent redeposits resin; change it frequently.
  6. Post-cure. Cure under proper wavelength and time. For dental work, a dedicated curing unit beats a DIY nail lamp every time.
  7. Finish and verify. Trim supports, polish, and check fit against the digital plan or patient.

Every step has a failure mode, and the most common ones cluster around washing and curing — not printing. Under-washing leaves uncured resin that irritates tissue; over-curing makes parts brittle. Treat wash and cure as clinical steps, not cleanup.

Exposure Settings & Printer Requirements

Dental resins demand accuracy, so printer choice matters. A 4K printer can handle study models; splints, guides, and denture work benefit from 8K/12K/16K resolution and a stable light source.

Parameter Typical Starting Range Notes
Layer height 0.03–0.05 mm Thinner for guides and die models
Normal exposure 1.5–2.5 s (mono LCD) Depends on resin and light power
Bottom exposure 20–35 s Longer for build-plate adhesion
Bottom layers 4–6 More for tall, heavy builds
Anti-aliasing On Smoother margins

These are starting points, not gospel. Always run an exposure test per resin, and recalibrate after replacing the FEP/nFEP or the light source.

Post-Processing, Safety & Biocompatibility

Dental work touches the human body, so safety is not optional. Handle uncured resin with nitrile gloves, work in a ventilated space, and never let uncured resin contact skin. Wash solvent should be kept clean and disposed of properly, and curing must be complete before anything enters the mouth.

Biocompatibility is a materials-and-process question. Use resins intended for the specific clinical application, follow the manufacturer's post-processing protocol exactly, and understand that a well-cured, well-washed part behaves very differently from one produced quickly. Consistency in wash and cure is what separates a lab with predictable outcomes from one that constantly troubleshoots fit.

Maintaining Your Dental Resin Setup

Long-term reliability comes from maintenance. Keep the vat film clean and replace it when cloudy, store resin filtered and away from light, discard solvent once it stops rinsing effectively, and re-run an exposure test whenever you change consumables. These habits prevent the slow drift that turns a calibrated workflow into guesswork.

Frequently Asked Questions

Can I use any resin for dental models?

For non-clinical study models, general-purpose resins can work. For anything that enters the mouth or bears on tissue, use a resin intended for that application and follow its protocol. Model resins are not interchangeable with splint or denture resins.

How long does a printed dental splint last?

With correct design, toughness-tuned resin, and complete post-curing, printed splints hold up for months of daily wear. Premature cracking almost always traces back to under-curing or a formulation that is too brittle for the load.

Do I need a special printer for dental work?

You need accuracy, a stable light source, and reliable exposure control. Monochrome LCD printers at 8K/12K/16K cover most dental applications. Industrial DLP machines go further for high-volume labs.

How often should I change the wash solvent?

Change it before it becomes saturated — typically every 10–20 prints depending on part size. Saturated solvent leaves tacky residue and causes cloudy, sticky surfaces that never cure fully.

Is printed castable resin as good as wax?

High-quality castable resin burns out with very low ash and can match wax patterns for metal frameworks. Cheaper castable materials leave residue that spoils the casting, so quality matters here more than anywhere else.

What is the biggest cause of dental print failure?

Post-processing inconsistency — dirty wash solvent, insufficient curing, and imprecise support removal. Printing itself is usually reliable once exposure is dialed in.

Common Dental Print Failures and How to Fix Them

Even a well-tuned setup produces occasional failures. The table below maps the most common dental printing problems to their real root causes — which, in dental work, are usually in post-processing rather than the machine itself.

Symptom Likely Cause Fix
Margins rounded or soft Overexposure / high layer height Lower exposure, use 0.03–0.05 mm layers
Sticky surface after curing Under-washing Replace dirty IPA, extend wash time
Part cracked after post-cure Over-curing / brittle resin Reduce cure time, select a tougher category
Model warped at base Uneven supports / peel stress Reorient, add supports, lower lift speed
Guide not transparent Wrong resin or pigment separation Use guide-clear resin, stir before use
Splint fits but feels soft Incomplete polymerization Extend post-cure under correct wavelength
Denture base distorted Hollowing without drainage Add drain holes, avoid trapped uncured resin

The pattern is clear: most clinical complaints trace back to washing and curing. When a part behaves unexpectedly, inspect the wash and cure steps before you touch the printer profile. A single scoop of contaminated solvent can ruin an otherwise perfect batch.

Matching the Resin to the Application

It is tempting to standardize on one resin and print everything with it. That approach fails because dental applications pull in opposite directions. Models need stability, splints need toughness, guides need clarity, and castables need clean burnout. No single formulation does all four well.

A practical strategy is to stock a small, focused kit: one model resin for the bulk of everyday production, one splint resin that satisfies your toughness requirements, one guide resin if you place implants, and one castable resin if you do metalwork. Rotate stock so older bottles get used first, and always stir or shake filled resins before pouring — pigments and fillers settle.

Digital dentistry rewards a small, disciplined material library far more than a shelf full of half-used bottles. Standardize on validated recipes, document exposure settings per resin, and treat each new material as a small project: run an exposure test, print one control part, and only then move it into production.

Final Thoughts

Dental resin printing is a workflow, not a single product. Pick the right resin category for each application, dial in validated exposure settings, and treat washing and curing with the same rigor as the print. Do that, and digital dentistry becomes faster, cheaper, and more consistent than the analog process it replaces.

Explore the full range of dental and engineering resins at ANTINSKY to build a complete digital dental setup around proven materials.

Stichworte: Dental Resin, Digital Dentistry, Guide, Resin 3D Printing
Vorherige
Nylon vs PETG vs ABS: Which 3D Printer Filament Should You Choose?
Nächste
Cold Plate vs Heated Bed: The Complete First-Layer Adhesion Guide

In Verbindung stehende Artikel

Co Print’s official Quadro 3D printer product image

Co Print Quadro Takes Four Independent Toolheads to Formnext 2026

Raise3D press image of T450 and T700 large-format 3D printers

Raise3D Brings Large-Format T450 and T700 Printers to Formnext 2026

ANTINSKY Antmega Cure UV Resin Curing Machine

Set Up a Resin Post-Curing Station with ANTINSKY Antmega Cure

InfiMech official MX Pro chamber heating illustration

InfiMech MX Series Sets November 10 Kickstarter Launch for Tool-Changing Printers

Hinterlasse einen Kommentar

Deine Email-Adresse wird nicht veröffentlicht.

Schnelllink

  • Drucker
  • Filamente
  • Filmveröffentlichung
  • Bauplatten
  • Zubehör
  • Partner-Marken
  • Blog

Firma

  • Suchen
  • Über uns
  • Kontaktieren Sie uns
  • Allgemeine Geschäftsbedingungen
  • Datenschutzerklärung
  • Immaterialgüterrechte
  • Versand
  • Allgemeine Geschäftsbedingungen
  • Rückerstattungsrichtlinie
  • Blog

ANTINSKY ist ein bekannter Hersteller von 3D-Drucker-Zubehör und hat seit vielen Jahren eine vertiefte Zusammenarbeit mit vielen 3D-Drucker-Marken, sodass unsere Zubehörteile wie Entformungsfolien, Harze, Filamente usw. eine beeindruckende Wirkung erzielen.

Wir sind der Überzeugung, dass die 3D-Druck-Technologie in der Zukunft mehr Träume für die Welt verwirklichen kann. Zu diesem Zweck vergessen wir unsere ursprüngliche Absicht nicht und gehen voran.

Bitte besuchen Sie die offizielle Website, um weitere Markeninformationen und Neuigkeiten zu erhalten.

© Antinsky 2026
Warenkorb 0

Einkaufswagen

Ihr Warenkorb ist derzeit leer.
Fügen Sie eine Notiz für den Verkäufer hinzu
Versandkosten ermitteln
Fügen Sie einen Rabattcode hinzu
null
Zwischensumme $0.00
Warenkorb ansehen