Phrozen Mighty 8K Z-axis screw does not work solution

Description of the problem:

Motor machine Z-axis control does not respond


    1. Check whether the screw rotates during movement

    2.Check whether the T-buckle of the lead screw is fastened to the lead scre

    3.Check the motor wiring


  1. Check the T-buckle if it runs properly
  2. Tighten again and check
  3. Put the machine down, remove the four screws of the upper cover plate, gently lift the machine to separate it, and reinsert the motor line

If you still can't start, please contact our engineers for remote assistance

If it still cannot be started, please contact our engineer for remote assistance

If you need detailed steps and remote guidance tutorials, please contact email at

Kommentar hinterlassen

Alle Kommentare werden von einem Moderator vor der Veröffentlichung überprüft