Direkt zum Inhalt

e-Mail:wang.xinyi@antinsky.com . WhatsApp:+86 13223308206

[Sonic Mega 8K] Z-axis calibration - Antinsky3d


All  building plates are calibrated perfectly before being shipped out, which means that you can start printing straight out of the box! However, in case you ever need to re-level Sonic Mega 8K’s building plate, in this article, we will guide you through the steps of calibrating your Sonic Mega 8K: 

If your 3D model(s) have failed to attach to the building plate, try increasing the bottom layer exposure time.

Before We Begin

Before we start, there are a few things to do before we start performing the Z-axis Calibration test on the Sonic Mega 8K.

  1. Remove the Resin Vat
  2. Remove & Clean the Building Plate
  3. Remove the Building Plate Handles

Want to know how? Let’s find out:

1) Remove the Resin Vat

Remove the resin vat and make sure there are no objects present on the 3D printer’s platform.

2) Remove & Clean the Building Plate

Remove the building plate and make sure to use 95% sanitizing alcohol to clean any remaining resin present on the building plate as well as the LCD screen.

*Tip: We recommend spraying 95% sanitizing alcohol and waiting for roughly 15 minutes so that the alcohol is able to soak any leftover resin more thoroughly.

3) Remove the Building Plate Handles

Sonic Mega 8K Z-axis

Use an Allen wrench to unscrew the building plate handles. Then remove the handles.

Perform the Z-axis Calibration Test on the Sonic Mega 8K

Step 1: Install the Building Plate

Sonic Mega 8K Z-axis

Kommentar hinterlassen

Alle Kommentare werden von einem Moderator vor der Veröffentlichung überprüft