What should be done about excess curing in model gaps

One. Problem description

After the fine model printing is completed, the precision is lost, which shows that the size of the gap is larger, and the model is out of shape, more than curing.


Two. Solution idea

1. Check whether it is level

2. Check whether the parameters set by the slicing software machine are incorrect

Three. solution

1. Relevel
2. Modify slice parameters as follows:
① Lifting distance, increase the static time after lifting and before return, reduce the lifting speed and static time after return, so that the model has more sufficient resin dripping time.
③ Check whether overexposure causes more than curing, it is recommended to do UV test.


If you need detailed steps and remote guidance tutorials, please contact email at 2818017587@qq.com

More 3D Print Knowledge Please Click


Click on the link for more information on 3D printing technology


Kommentar hinterlassen

Alle Kommentare werden von einem Moderator vor der Veröffentlichung überprüft