Bambu Lab Bambu Dual-Sided Textured PEI Plate - A1 mini - Antinsky3d
Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild
Bambu Lab Bambu Dual-Sided Textured PEI Plate - A1 mini - Antinsky3d

Bambu Lab Bambu Dual-Sided Textured PEI Plate - A1 mini

Bambu Lab
Preis:
$19.99

Beschreibung

  Bambu Textured PEI Plate, Excellent first-layer adhesion, Improved durability

 

Recommended Settings

Please note that other slicer settings might need to be adjusted based on the printed model and the filament requirements

Materials Heatbed Tempe rature Glue Stick Required?
PLA/PLA-CF/PLA-GF 45~60℃ No
PETG/PETG-CF 60~80℃ Glue Stick/Liquid Glue
TPU 35~45℃ Glue Stick/Liquid Glue
PVA 45~60℃ Glue Stick/Liquid Glue



Excellent first-layer adhesion, Improved durability

After optimizing the manufacturing process of the Bambu Texture PEI Plate, the durability of the plate is enhanced. Additionally, the adhesion between the prints and the plate is significantly improved, eliminating the need for adhesives.

*In some situations, glue is required for very specific filaments


Surface Finish



Self-release when cooled down

PEI is an excellent material for 3D printing applications due to its ability to withstand the repeated heating and cooling cycles of a printer heatbed. Prints come off easily when the temperature of the heatbed reaches room temperature, and we always recommend waiting until it reaches 35℃ or lower. If the print is still adheres to the plate, simply bend the steel plate and the model will fall right into your hands.




Textured surface finish

Bambu Texture PEI Plate offers a one-of-a-kind first-layer surface. Through the application of a powder-coating process, this PEI Build Plate creates a rugged texture that adds a texture to your prints.

Compatibility with various filaments, especially for PLA

PEI enables printing with common materials such as PLA, TPU, PETG and PVA.
*Please apply liquid glue or a glue stick to prevent the sheet from tearing if print filament other than PLA


Considerations

 

  • Increasing the temperature of the heatbed enhances the adhesion of the filament to the build plate. Users can adjust the temperature of the heatbed or apply glue if additional adhesion is needed.

  • During the printing process, dust and grease on the surface of the build plate can negatively impact material adhesion. It is recommended to regularly clean the surface with detergent and water to eliminate any dust or grease residue first. If it doesn't work, clean the surface with alcohol.

  • Wait until the build plate fully cools down to prevents damage to the plate and prints when removing the printed parts.

  • Do not clean the plate with acetone, as it will damage the PEI surface.

  • Carefully sanding the surface with fine-grit (600 was recommended) sandpaper can help restore adhesion.

  • The Textured PEI plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.

    •  

    Installation Steps

    Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you

    Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you

    Step 2: Lower the plate and secure to the magnetic platform

    Step 2: Lower the plate and secure to the magnetic platform

    Product Specification

    Material
    PEI powder coating+ Stainless Steel Plate
    Surface temperature resistance
    		 Up to 180℃
    Flexible stainless steel plate thickness
    0.4 mm
    Textured PEI coating thickness
    0.075 mm
    Usable print size
    180*180 mm
    Package size
    220*195*15 mm
    Package weight
    230 g
    Color
    Gold

    You may also like

    Recently viewed