Beschreibung
DOWELL DM6 3D Printer
Luoyang Dowell electronics technology Co, Ltd was founded in31th Dec, 2014. It's a forerunner of massive production and thereasearch and development for the domestic FDM and SLA 3Dprinters.
DOWELL is committed to the market application of large 3Dprinter, which will provide efficient and affordable 3D printingplan for personnel, family, school and enterprises in order tomeet the requirement of each creativity for the benefit, quality and rapid forming
Strong Frame Body
High quality strong aluminum alloy as main body, 4 screw rollers, stable for large 3d printing.
One key auto leveling help you easy operate
1. First, 4 corners auto-level independently.
2. Then 8*8=64 points on the whole bed automatic detection platform flatness. Through the independent 4 screw automatic adjustment to achieve the true automatic leveling.
Auto resume printing from power off
The machine will continue to complete the last printing work from the point of suspension after power resume.
Ball screw & liner guide rails
X axis and Y axis linear guides have high accuracy and long service life.
Z-axis ball screw converts rotary motion into linear motion, with high transmission accuracy and low friction resistance, ensuring the accuracy and stability of the machine.
6mm tempered glass platform
Whole bed heated by silicon rubber heater evenly, precise control temperature 0-100 degrees.
Super load capacity more than hundreds kilograms
7 Inch Touch Screen
The operation interface is 7 inch full color large screen, it is conveniet to operate.
Silent drive & strong motor
At the same time with silent and efficient two advantages, effectively reduce work noise
Support Filament
Dowell3D independently developed 420° high temperature nozzle with constant temperature enclosure can print a variety of filament perfectly.
Customzaiton Options
In addition to the basic features, Dowell3d offer customized services to add more fun to your printing work.
Wide Choice of Printing Size
Besides the standard sizes below, you can also contact us to customize your preferred print size.
|
Model
|
DM6
|
|
|
Printing size ：
|
600*600*600mm
|
|
|
Frame:
|
40mm aluminum section
|
|
|
Movement of X&Y axis:
|
High precision linear rail
|
|
|
Movement of bed:
|
4 X screw rods & 2 X roller rods
|
|
|
Filament feeder:
|
Near end
|
|
|
Printing bed:
|
6mm tempered glass
|
|
|
Heating bed:
|
With digital temperature controller
|
|
|
Bed temperature:
|
0-100℃ (optional 150℃ )
|
|
|
Nozzle size:
|
0.4, 0.6, 0.8, 1.0mm
|
|
|
Nozzle temperature
|
0-420℃
|
|
|
Operation Interface:
|
7” TFT full Color
|
|
|
Voltage:
|
110V/220V
|
|
|
Positional accuracy:
|
0.02mm
|
|
|
Layer accuracy:
|
0.04-0.6mm
|
|
|
Slicing software:
|
Dowell3d / Cura / or other similar software
|
|
|
Input format:
|
STL/OBJ/Gcode/JPG
|
|
|
Filament diameter:
|
1.75mm
|
|
|
Connection:
|
U disk/SD Card
|
|
|
Standard functions:
|
3D/BL toch auto leveling, filament sensor, auto resume from power off, auto power off, nozzle anti-collision
|
|
|
Customization Options:
|
1. Medium extrusion flow rate extruder
2. Dual extruder
3. Dual feeder one nozzle
4. Linux operating system
5. X,Y module movement
6. Constant temperature enclosure
7. Pellet extruder
8. Printing size
|
|