Bambu Lab Hotend with 0.2 mm Nozzle - A1 Series


Price:
Sale price$11.99

Description

Quick Swap Nozzle Design


The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal and installation of the hotend.

*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.



Highlights of Various Nozzle Diameters

0.2mm Nozzle
Optimal Print Fineness

Extremely small layer gaps
More detailed on the vertical print surface

图片加载失败文案

0.2mm Nozzle
Optimal Print Fineness

Smaller diameter extrudes thin filaments
High resolution on the horizontal print surface

图片加载失败文案

0.6mm and 0.8mm Nozzle
Faster Print Speed

Larger diameter extrudes more filaments per second, resulting in faster print speed




图片加载失败文案

The 0.4mm nozzle is widely recognized as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is utilized in Bambu Lab A1 Series 3D printers.



Filament Compatibility

Material 0.2 mm Nozzle 0.4 mm Nozzle 0.6 mm Nozzle 0.8 mm Nozzle Hardened Steel Required?
General PLA YES YES YES YES Optional
PLA Sparkle *NO YES YES YES Optional
PLA Marble *NO YES YES YES Optional
Wood/Rock/Metal-filled PLA *NO YES YES YES Optional
PETG YES YES YES YES Optional
PVA YES YES YES YES Optional
ABS YES YES YES YES Optional
ASA YES YES YES YES Optional
PC YES YES YES YES Optional
PA *NO YES YES YES Optional
TPU *NO YES YES YES Optional
Bambu PLA-CF *NO *Highly
Recommended
YES YES *Required
Bambu PETG-CF *NO *Highly
Recommended
YES YES *Required

[*Note]
  1. Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
  2. For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
  3. Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.
Learn more about filament compatibility on Bambu Lab Wiki.

Installation

Learn more about replacing the Hotend with Nozzle on Bambu Lab Wiki.


In the Box

1. Hotend with 0.2 mm Nozzle * 1

Compatibility

A1 Series


Product Specifications

Materials Metal
Packaging Size 60*60*30 mm
Color Black Packaging Weight 30 g

You may also like

Recently viewed