Description
Founded in 2002, Shenzhen eSUN Industrial Co., Ltd. is the leading brand of 3D Printing Materials.
In R&D, eSUN has more than ten international and domestic patented technologies, and is the drafting unit of the national standard for PLA 3D printing filaments.
After years of market development, eSUN has more than 50 agents and distributors around the world, and its products are sold to more than 100 countries and regions.
What is ePLA Lite Filament?
· ePLA Lite is improved and upgraded based on ordinary PLA, ePLA Lite keeps all the advantages of PLA, easy to print just like ordinary PLA. It has higher strength, better toughness. More durable and not easy to break.
· Great printing effect with smooth and flat surface.
· Excellent Printibility & Extraordinary Mechanical Performance &Constant Diameter Consistency.
Specification of ePLA Lite:
Diameter: 1.75mm
Weight: 1KG
8 Available Colors: Black, Grey, Blue Purple, Fire Engine Red, Blue, Yellow, Red, Green
Printing Temperature: 190-230℃ (Recommended Temperature 215℃)
Recommended Heated Build Platform: Textured Paper, PVP Solid Glue, PEI
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | ePLA-Lite |
| Density(g/cm3) | 1.23 |
| Heat Distortion Temp(℃,0.45MPa) | 53 5/10 |
| Melt Flow Index(g/10min) | 5.7（190℃/2.16kg） |
| Tensile Strength(MPa) | 61.34 7/10 |
| Elongation at Break(%) | 29.92 3/10 |
| Flexural Strength(MPa) | 100.27 10/10 |
| Flexural Modulus(MPa) | 3824 7/10 |
| IZOD Impact Strength(kJ/㎡) | 6.3 2/10 |
| Durability | 4/10 |
| Printability | 9/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 190 – 230℃Recommended temperature：215℃ |
| Bed temperature(℃) | 45 – 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
About this product
[Easy to print and excellent mechanical performance] Based on the improvement of ordinary PLA technology, ePLA Lite has better toughness and higher strength, while maintaining the characteristics of easy to print. More durable, not easy to break, with gorgeous smooth printing effect. Suitable for beginners.
[Dimensional tolerance consistency] 1 kg spool (2.2 lb), accuracy+/- 0.03 mm, eSUN ePLA Lite 1.75 mm 3D printer wire uses minimum tolerance and low warpage to ensure continuous feeding and stable printing. Suitable for almost all 1.75mm FDM 3D printers.
[No tangle and no blockage] Full 1kg 3D printer filament reel, perfect roundness and diameter tolerance is very tight, winding is good, and will not overlap or tangle. Good melting, smooth feeding, no clogging of nozzle or extruder. No bubbles, few knots, high successful printing rate.
[High performance-price ratio and wide application] Good layer adhesion performance can meet the requirements of your printing functional parts, with higher toughness. It is widely used in machinery, electronic equipment, automobile, decoration, COSPLAY and other fields.
[Environmentally friendly and recyclable] eSUN ePLA Lite 3D printing filament is made of starch raw materials from renewable plant resources. Low odor. The waste is reused to produce recyclable paper reels and boxes. Packed in a sealed vacuum bag with a desiccant bag, you can easily keep your 3D printer consumables in the best storage state.