ESUN S200 Standard Resin UV 405nm LCD Photopolymer Resin 1KG For 3D Printer Standard Resin


Color: Black
Price:
Sale price$40.00

Description

ESUN S200 Standard Resin
Founded in 2002, Shenzhen eSUN Industrial Co., Ltd. is a national high-tech enterprise, a national strategic emerging industry new material project undertaker, and one of China's top ten biodegradable enterprises.

Description

It is easy to print and can form thin supports. The small details of the model are clearly presented; low odor; high precision, fine surface, clear texture; rigid, the product is not easily deformed by external forces; macaron color, suitable for printing Enthusiasts; strong compatibility, suitable for mono screens and color screens; cost-effective

Sellingpoint

Easy to print
High rigidity
High precision
Low odor

Macaron Colors
Wide Compatibility
Cost-effective

 3D PRINTING PHOTOPOLYMER RESIN Properties Table
3D PRINTING PHOTOPOLYMER RESIN S200 Standard Resin
Viscosity(mPa·s) 200-230
Density(g/cm3) 1.1
Tensile Strength(MPa) 1.108-1.109
Elongation at Break(%) 8.8-9.4
Flexural Strength(MPa) 70-74
Impact Strength(J/m) 25-27
Tearing Strength(GPa) /
Heat Distortion Temp(℃) /
Hardness(Shore D)  83-85

 

 

 

The surface is delicateSmall details are clearly visible

High Precision , Easy to printFormable thin walls and thin supports

Precautions

Usage

1 ) Shake well before use , prohibiting the use of resin in places where there is a lot of sunlight

2 ) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated

3 ) Inadvertent contact , as soon as possible to use a lot of water rinse . If you feel unwell , seektimely medical attention

4 ) Once the model is complete , please wash it with high 95% degree or higher ethanol alcohol for30 seconds at least

5 ) Do not pour the resin in the resin vat into the unused resin , do not leave the resin in theresinvat for a long time without use to avoid resin pollution affect the printing effect

Storage

1 ) Keep away from light seals at room temperature ( Sunshine contains a lot of UV light , will solidify photosensitive resin .

2 ) It is recommended to store the resin under 20-30C in a sealed container . Avoid any dusty ormoist environment

3 ) The resin is stable under different climatic conditions and is also easy to store , overcoming theshortcomings of other resins easily damp softening and environmental corrosion

Notice

The picture shown is a representation of the item , color may vary slightly due to the color setting of each individual monitor . Please double check the size and color before purchasing

 

You may also like

Recently viewed