Phrozen Wash & Cure Kit for 10inch 3D printers
Phrozen was founded by a group of Taiwanese 3D printing enthusiasts in 2016. We produce professional consumer-friendly 3D printers for industrial application, medical, and personal use.
After running successful Kickstarter campaigns, we have now expanded to the U.S., Europe, Japan, and South Korea, and more! Our clients include those in the dental industry, the jewelry industry, and those interested in creating digital models.
At the same time ,we were authorized by Phrozen ,Under our (antinsky)management, the products sell well and have been praised by customers.
Wash, Dry, and Cure Your Large Prints!
Whether you are new to resin 3D printing or have been here for a while, you must have known the agony of cleaning and curing your prints.
Well, we are going to change that!
Introducing the Phrozen Wash & Cure Kit!
Wash 10” Building Plates With Ease
* Clean Delicately With Powerful Vortex
* Dunk Your Mighty 8K’s Plate Straight In!
Dry & Cure All in One Go!
* Dry models faster with the Dual Fan System
* No More Sticky and Unevenly Cured Models
Instructions for use
* The ambient temperature for best use is 0-40 ° C and the humidity is 20% -50%.
* The model is better after cleaning, air drying and then curing.
* If the machine will not be used for a long time, pls disconnect the power supply to extend the service life.
* After cleaning, remove the cleaning bucket and close the lid to prevent cleaning solution from getting onto the machine and causing short circuits.
STEP 1: WASH
Put your uncured model into the 8L washing station.
STEP 2: DRY
Transfer it to the curing station and start the air drying mode.
STEP 3: CURE
Keep the model inside and turn on the curing mode.
STEP 4: COMPLETED
Take out your awesome model then all done!