how do deal with excessive Resin - Antinsky3d

Preserving Excessive Resin

Once you’re done printing, remember to filter out excess resin. Don’t leave excess resin in the vat as this might lead to solids forming within the liquid which will affect the printing process.  

Step 1: Please filter out the excess resin using a funnel.

Step 2: Preserve the resin in an opaque plastic bottle. Do not store new resin and used resin in the same container.

Step 3: Store your opaque plastic bottle in a plastic zip-lock bag to reduce exposure to air.

Step 4: Make sure to preserve resin at a room temperature of roughly 15°C ~ 35°C or 59°F ~ 95°F in a dry environment and avoid sunlight.  

Kommentar hinterlassen

Alle Kommentare werden von einem Moderator vor der Veröffentlichung überprüft