BlueCast X-FILIGREE V2 for mono LCD/DLP

BLUECAST X-FILIGREE V2 for mono LCD/DLP

X-Filigree® V2 improved the performance of the previous version. The new resin has been improved to meet the needs of Middle Eastern designers. Thanks to the polymer it ensures perfect printing properties with sharp details, and excellent dimensional stability in time without shrinkage. X-filigree® V2 was developed by BLueCast R&D in order to allow perfect filigree casting results with any kind of investments and burnout cycles. Standard wax burnout (12 hrs), Fast burnout ( 6 hrs), Ultrafast burnout (2 hrs).

Main features:

• No bleeding;
• Excellent dimensional stability in time for all thicknesses. No shrinkage;
• Low viscosity even at low temperatures (easier to clean, easier to get back from patterns;
• Strong adhesion to the platform, no need for primer.

Cleaning:

Alcohol: 91%/99% ethyl alcohol.

• With Ultrasonic cleaner run a cycle of 3 minutes (SUGGESTED
  PROCEDURE)
• With the resin washer machine, run a cycle of 5 minutes approx.
• With simple immersion in alcohol, a bath of 8 minutes approx.

Post-Processing:

A pattern post-curing (10 minutes minimum) is required.